Customers compare EQ34FR to these similar products
Products Featured in this Video
Hey everyone. I'm Ellen here etrailer.com .and we're going to be taking a look at the equalizer weight distribution shank. So this is going to be that important component that connects to your towing vehicle. And that allows you to mount on your weight distribution head so that you can tow your trailer more effectively. Of course, those weight distributions are going to be a great option for… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
You can certainly use a weight distribution system on your lifted truck. The key will be to find a weight distribution shank that offers you enough drop to be able to tow your trailer level. Weight distribution systems are available without a shank…
view full answer...Yes, the Equal-i-zer Weight Dist Shank part #EQ90-02-4900 will work with the Fastway E2 weight distribution system such as the Fastway e2 Weight Distribution w/ 2-Point Sway Control part #FA94-00-0600. As long as the 10" of rise and 6" of…
view full answer...You sure can! Weight distribution shanks are not brand specific, you will just need to make sure you use a shank that is the same style as there is two different styles. Based on your picture you will need the #EQ34FR that fits the 2-1/2"…
view full answer...The tongue weight capacity of the Curt weight distribution shank part #C17132 that you referenced is 1,500 lbs. I believe that is your only question but if you have any other parts from your WD system that needs to be replaced let me know and…
view full answer...I have a solution for you but the Lippert sway control part #LC380605 does not work with the GM OEM brake controllers like what your 2022 Silverado has. Instead you'd want to go with the Tuson Sway Control Unit part #335TSC-1000 which does work…
view full answer...Porpoising (bouncing like you described) and sway are both commonly caused by the same thing when towing and that is not enough tongue weight for the trailer relative to the total amount of weight the trailer weighs. You need the tongue weight to be…
view full answer...Weight distribution spring bar tension can be increased by tilting the head toward the trailer so that the ends of the spring bars are closer to the ground. Once connected to the lift brackets this increased angle translates into more tension, which…
view full answer...Most of the time when a tow setup is porpoising with a weight distribution system all you have to do is add a bit more spring bar tension to minimize the porpoising. With an Equalizer system you would need to angle the spring bars down further to add…
view full answer...It's possible that EAZ-Lift spring bars will fit the Curt Replacement MV Weight Distribution Head #C17075, but that's not something we can confirm as it hasn't been tested. With that said it is a bit unlikely, as most of the time brands…
view full answer...The typical shank that comes with the Equal-i-zer Weight Distribution System #EQ37120ET has a 7" rise and 3" drop measuring 12" overall. For a shank that fits your 2-1/2" receiver to go with the #EQ37121ET I recommend the…
view full answer...Thank you for the picture! The overload spring that the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-HD is referring to is located on top of the leaf spring pack. Based on the picture you provided, you will be able…
view full answer...The Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88338 should work great on your 2015 GMC Sierra 2500 but you will likely just need to add a spacer or two to accommodate for its 3-1/2 inch lift. The exact size spacer(s) you need will…
view full answer...