Dutton-Lainson Trailer Winch - Standard Hand Winch - DL14125 Review

content loading

Customers compare DL14125 to these similar products




Products Featured in this Video



Review of Dutton-Lainson Trailer Winch DL14125


Today we're going to review part number DL14125. This is the Dutton Lainson hand winch. This is a single speed winch, has a 600-pound winch capacity for horizontal pulling applications. The hub diameter size which is this part right here is a 5/8-inch drum hub diameter, it does use the high carbon steel gears and has the permanent lubricated bearings. This winch does have a zinc TUFFPLATE finish which is a yellow chromate TUFFPLATE finish which has three times the corrosion resistance of your standard chrome-plated finish. The handle is included and the handle would slide right onto here and then it has a lock nut that is put on over there and then tightened down and basically it is a ratchet crank so it does have a full 360 degree rotation.

There is ratchet paw which is this lever right here that when you release it it will allow the winch to completely free wheel in both directions. Then when you will engage that ratchet paw it will allow you to crank the winch. The gear ratio on this winch is 3.2:1 which basically means to rotate this drum one revolution it will take the handle to go around 3.2 times. This winch does come with a five-year limited warranty, it is made in the USA and this winch can use a cable of size 5/32 and it can also use a nylon strap. That should do it for part number DL14125.


Questions and Comments about this Video

Info for this part was:

Written by:
Lindsey S
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.