Draw-Tite Hitch Ball - Trailer Hitch Ball - 19260 Review

content loading



Customers compare 19260 to these similar products




Products Featured in this Video



Review of Draw-Tite Hitch Ball 19260


Speaker 1: Today, we're taking a look at the 1-7/8" Hitch Ball from Draw-Tite.Now, this hitch ball installs onto a ball mount, and provides a connection point for your trailer's coupler. It's made from a durable steel construction with corrosion-resistant chrome finishing. It does come with your lock washer and the nuts. Both of those are included. The wrench flats here on the side of the ball allow for an easier installation. You can use a 1-5/8" wrench here at the flats to make installation easier and get everything tightened as needed.Again, the ball diameter is 1-7/8".

Weight capacity is engraved right there on the top of the ball. It's 2,000 pounds. When it comes to the shank, the diameter measures 1". The shank length measures 2-1/8". This is designed to fit a draw bar thickness of 1/2" to 1".

The nut is 1-1/2". Torque rating on the nut is 250 foot-pounds, and the product's covered with a limited lifetime warranty.When installing this, you place this through the ball hole on the draw bar. On the underside of the draw bar, you place on your lock washer, followed by the nut. You want to get everything tight and secure, so once you have it hand tight, you can finish the tightening process using a socket wrench and wrench. Then you want to get it to the proper torque rating as specified in the instructions.That's going to do it for today's look at the 1-7/8" Hitch Ball from Draw-Tite..


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Brandon M
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.