All About the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver Video

The best trailer hitch option we have for an International 3800 School Bus is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16. This hitch is a great option as it can be bolted-on (once drilled) or welded, the brackets can…

While we do have an option for a hitch for your 2005 Ford E-450 cutaway, there isn't a custom fit. So the best option is a universal service body hitch, which can either be welded or bolted on. The right one is going to depend on the height of…

Yes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16 is designed specially for the purpose of attaching to larger frame vehicles like a semi so this will work perfectly for you. The Draw-Tite Ultra Frame Service Body…

The best option I have for you to add a trailer hitch to your shuttle bus is with the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16 which has the Class V rating that you are after. In regards to installation, this will be…

I do have an option for you though there aren't custom fit hitches for box trucks. The frame is not really the issue but rather the body the up-fitter adds on which could hang down below the frame where the hitch mounts or actually use the holes…

I do have an option for you but the Curt Trailer Hitch Receiver part #C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit your 2009 Volvo D13. However, what you can use is the…

We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…

I have a solution for you but the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item #3371809065 will not fit your 2002 GMC W4500 Forward. You will need to use one of our universal hitches like the Draw-Tite Ultra Frame Service Body…

The Draw-Tite 41954 Class V hitch which we offer as part #DT35MR is designed for 2015 - 2022 Ford F-150 models that aren't equipped with a factory hitch. I've made up a diagram showing the dimensions and hole spacing for you.

I am happy to help! The width of the Curt Trailer Hitch Receiver #C15325 measured center of the left side bolt hole to the same center of the same hole on the right side measures 34-1/2". From the center of the furthest forward bolt hole to the…

The side plates in the Curt Class 5 Universal Weld-on Hitch #C87CR have only been tested by Curt in the vertical position. With that they are not sure how the mounting brackets will hold up if mounted horizontally. I recommend the Buyers Products…

On a 7 pin round which is the common connection on a semi trailer, the clearance/marker lights are at the 10 o clock position when you look at the trailer wiring connection. When looking at the connector on the back of the truck, that will put the…