View Cart

Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-219-50UC3 Review

content loading



Customers compare 8-219-50UC3 to these similar products




Products Featured in this Video



Review of Dexter Trailer Hubs and Drums 8-219-50UC3


Speaker 1: inaudible 00:00:00. Speaker 2: Today we're gonna take a look at the Dexter 12-Inch Galvanized Trailer Hub and Drum Assembly for 5200-pound to 7000-pound axles, with the 8 on 6 1/2-inch bolt pattern. Now this is a marine-grade hub and drum assembly, which will fit axles with drum brakes. It includes everything shown here on the table, the hub and drum assembly itself, the inner, the outer bearings. Now the bearing races are pre-installed already into the hub. The grease seal, the grease cap, and the lug nuts are all included.This hub and drum assembly does have a Gal-Dex zinc plating, which is 500-hour salt spray rating.

It's ideal for use on a boat or snowmobile trailer, and it is durable enough for saltwater applications. It is designed to work with 12-inch by 2-inch electric or hydraulic brake assemblies. Again, the application on this is 5200-pound, 6000-pound, or 7000-pound axles. Weight capacity on this one assembly is 3500 pounds. So when this has inaudible 00:00:55 one on the other side, it'll meet the maximum 700-pound rating.The bolt pattern, again, is an 8 on 6 1/2-inch bolt pattern.

Wheel stud size, a half-inch by 20. The drum dimensions, we're gonna measure here. Inside- inside is 12 inches. The width on it is 2 and a quarter inches. And the bearing races in the seals are all included.We'll start with the inner bearing.

The inner bearing is a part number 25580. Has a 1.75 inner diameter. That goes right onto the inner bearing race just like that. The outer bearing, which is part number 14125A, has an inner diameter of 1.25 inches. Goes on the outer bearing race just like that.

And I mentioned the races we're all pre-installed and included.The grease seal right here is part number 43285. Has an inner diameter, it is a double-lip grease seal, has an inner diameter of 2.25 inches. Outer diameter of 3.376 inches. And that'll go right in the back here. Once the bearing's installed, then the seal goes on over that. The grease cap, which is part number F001526, has an outer diameter of 2.722 inches. Once the outer bearing is installed in the race, then that is what goes over that, just like that. And the lug nuts. That includes 8 of the part number X1023R. Those are half-inch by 20-size lug nuts.But that should do it for the review on the Dexter 12-Inch Galvanized Trailer Hub and Drum Assembly for 5200-pound to 7000-pound axles, with the 8 on 6 1/2-inch bolt pattern. Speaker 1: inaudible 00:02:34.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.