The Low-Down on the Dexter Trailer Idler Hub Assembly Video

Hi Jason, In order to find the correct hub/drum for your M1101 trailer we'd need to first determine what your bearings and grease seal are and the axle capacity. If the other hub you have has anything stamped into it we can also try looking up…

Hey Eric, thanks for reaching out! Yes, a license plate with mounting holes 5-3/4" apart will work with the Optronics LED Trailer License Plate Light with Bracket #LPL56CB just fine.

Currently Dexter only offers either the Self-Adjusting Brakes #23-464-465 or Brakes With Parking Brake #23-112-113 which will fit your 1997 M1101 trailer. Both of these are sets of brakes for the left and right while the Drum #42866UC3 is offered as…

Hello Derrick. We do sell the #AKEBRK-7-SA brake assemblies individually. Just need to know if this is for the driver or passenger side of your trailer since they are available for both sides: Driver Side - Electric Trailer Brake Assembly -…

For your M101A1 Military trailer the parking brakes can be maintained when adding electric brakes when you use the Dexter Electric Trailer Brake Kit w/ Parking Brakes - 12" - Left and Right Hand Assemblies #23-112-113. These electric brake…

Based on my research your M1101 trailer has a GVWR of around 3400lbs, so for a replacement axle I recommend taking a look at the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Off-Road Tires - 3,500 lbs #ASR35HDS01 which will…

The bearings you need for your Silver Eagle M1101 trailer are #25580 and #14125A. If you would like a full bearing kit then we also have the #BK3-200 as well.

If your Military M1101 Trailer uses a Titan Model 10 Surge Brake Actuator the Replacement Bolt-On Inner Slide with Leveler Channel for Titan Model 10 Actuator #T4721700 will work perfectly to replace your pintle, but if you are wanting to go to…

The two mounting holes on the Optronics LED Trailer License Plate Light part #LPL56CB which attach the bracket to the trailer are spaced apart 3-1/2" on center so it will be a direct fit for you.

So long as you have a standard 5-bolt mounting flange on the axle such as the Brake Mounting Flange for 3" Round Axle #4-44-1 you can use the 6,000 lb Dexter Electric Trailer Brake Kit with Parking Brakes #23-112-113. You will also need to have…

Here are the right hand electric drum brake assemblies we have for a 7,000lb axle. Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs #23-181 Electric Trailer Brake Assembly - 12" - Right Hand - 5,200 lbs to 7,000 lbs…

If you want to deactivate the hydraulic brakes on your boat trailer, you can certainly do so. The simplest way to do this would be to drain the brake fluid from the lines by disconnecting the brake lines from the wheel cylinders and allowing the…