Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-218-9 Review

content loading



Customers compare 8-218-9 to these similar products




Products Featured in this Video



Review of Dexter Axle Trailer Hubs and Drums 8-218-9


Speaker 1: Today we're going to take a look at the Dexter Oil Bath Trailer Hub and Drum Assembly for 8,000 pound axles. Has an 8 on 6 and 1/2 inch bolt pattern. Now this trailer hub assembly will fit 8,000 pound Dexter oil bath axles. Works with both electric and hydraulic brakes. It is designed to fit the 12 and 1/4 inch diameter by 3 and 3/8 inch wide brake drums.Now the inner and outer bearings, the oil seal, the oil cap are all sold separately, and on this product page it will list the part numbers that are needed. The bearing races are pre-installed in the hub.

The outer race bearing race you can see right there, and if we turn around the inner bearing race is right in there. The lug nuts you can see are included.Again, the application is 8,000 pound Dexter oil bath trailer axles. The drum dimension after measuring it would be 12 and 1/4 inches by 4 inches wide. Bolt pattern again is 8 on 6 and 1/2 inches. The wheel stud diameters are 9/16.

The lug nuts that are included are 8 of the 9/16 by 18 thread per inch lug nuts. The hub pilot diameter on this one, it's going to be 4.56 inches, and the weight capacity is 4,000 pounds on this one, so when this is used with one on the other side it'll feature 8,000 pound capacity on the axle.But that should do it for the review on the Dexter Oil Bath Trailer Hub and Drum Assembly for 8,000 pound axles with the 8 on 6 and 1/2 inch bolt pattern.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.