Feature Breakdown: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector Video

The Draw-Tite Ultra Frame Trailer Hitch Receiver #DT35MR is currently our only class IV receiver that fits your 2020 Ford F-150 XLT that did not come with the factory receiver. The Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector…

We have what you need. To start the etrailer Trailer Hitch Receiver part #e63TR is a great choice designed specifically for trucks without the factory hitch. For wiring the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector part…

The Adapter 4-Pole to 7-Pole and 4-Pole #37185 is a universal part that will work on most vehicles and will require you to either run additional wiring for the charge line circuit, brake line and reverse light wires. These can either be new wiring…

You can install a 7 way connector on your 2019 Ford F-150 by using the Curt T-Connector #C56413, which will plug into the factory supplied 4 way connector plug on your vehicle and give you a fully functioning 7 way connector. If you've got a…

We do have a solution for you, however, you will not be able to power reverse lights on a trailer with a 4-pin trailer connector. The reverse lights on a trailer must receive power from the reverse lights on the tow vehicle. To do this, you will want…

There are several hitches to fit your 2020 Ford F-150 that does not have the factory hitch, the Curt #C14017 is the class IV. It has base capacities of 10,000 lb towing and 1,000 lb tongue weight capacity, this increases to 12,000 lb towing and 1,200…

Thanks for reaching out, Jeff! While I'm not familiar with adding an OEM-style brake controller to a Ford pickup, since your 2019 F-150 didn't initially come with the factory tow package my instinct is to have you check fuse 24 for your brake…

For your 2017 Ford F-150 we have the 7-way kit part #C56413 as a confirmed fit. This plugs into the trailer wiring connector that is present at the truck frame rail and gives you a functional 7-way. I attached an install video for this for you to…

Some models have a plug-in port to easily wire in a brake controller, but there isn't a way for us to know if the specific one you're looking at has this connection available without physically searching for it in the vehicle. "Tow…

The new Ford trucks like your F-150 that have the smart tow package require a trailer to be connected for the 12 volt power circuit to activate. So what I would recommend you do is try connecting to a trailer and see if the circuit then activates.

The Curt harness you purchased (thanks by the way) part #C56413 is a fully functioning 7-way connector after you install it so it has a 12 volt circuit supplying power to your trailer's battery. With that being said you won't be able to…

Your 2018 Ford F-150 without the tow package and 7-way does have brake controller wiring currently so once you have the 7-way part #C56413 installed you'd be able to easily install a brake controller using the truck's factory wiring. The P3…