bing tracking image

CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10161GA-2 Review

content loading

Customers compare CE10161GA-2 to these similar products




Products Featured in this Video



Review of CE Smith Boat Trailer Parts CE10161GA-2


Today, we're going to be taking a look at the CE Smith Heavy Duty Vertical Bunk Brackets. These heavy duty brackets let you mount a bunk board on your trailer. It's going to be ideal for larger bunk boards, such as a 3 by 8 or a 4 by 8. It's very simple. Basically one set of these is going to stabilize one end of the bunk board, so you will need additional brackets for the opposite end of the board. They're really nice. They're a nice strong, durable construction.

It's a 90 degree angle for vertical mounting on the level boat trailer frames. It will require two 1/2" diameter U-bolts for installation. Those are sold separately. They are available here at etrailer.com. It does feature four pre-drilled holes on each bracket that let you raise or lower the bunk board during the installation, and then you can secure the board vertically on its side between the brackets with a 1/2" bolt.

That's going to be sold separately, as well. Now, these are made from a galvanized steel. It's going to do a great job at resisting rust and corrosion. Very strong and durable. They are suitable for salt water exposure. Product's made right here in the USA.

This part number is going to come with two brackets. We're just going to take some measurements real quick of one of them. They're going to measure exactly the same, so if we take a width measurement, it's going to measure about 5" wide. If we take a length measurement, from bottom to top, we're looking at 8" tall. The mount holes are going to be separated on center.

Now, these are the holes that would mount to the trailer frame, or they'd be used to mount the bracket to the trailer frame. These are separated on center by about 3-9/16". Then, the distance that we have between the bunk board mounting holes, center on center, it's going to be the same distance between each hole. That's going to be separated by 1-1/2". Again, nice design. Each bracket is going to have a plate thickness of 1/4". Again, steel construction with a nice protective finish. It's galvanized steel to offer rust and corrosion resistance. That's going to do it for today's look at the CE Smith Heavy Duty Vertical Bunk Brackets.


Questions and Comments about this Video

Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.