bing tracking image

Buyers Products Emergency Supplies - Warning Lights - 3378891130 Review

content loading

Customers compare 3378891130 to these similar products




Products Featured in this Video



Review of Buyers Products Emergency Supplies 3378891130


Speaker 1: Today, we're going to take a look at the four LED surface mount strobe light with the clear lens and the amber LEDs. Now this strobe light is installed in this nice aluminum housing. It's rated IP67 for water and dust resistance. Common use for this light is pickup trucks, work trucks, or trailers. Has a nice black aluminum base with the clear lens, four amber LEDs, and it does include this black plastic flange and the rubber mounting gasket to use when you install it.Now, it does have the LEDs, four LEDs that make great replacements for incandescent lights. They last about 50 times longer, and they're more efficient because they'll provide brighter light with less power output.

And of course there's no bulbs to replace or brittle filaments to break. This does offer 19 flash patterns and simultaneous or alternating functions. Does connect using these blunt cut wire connections. The wire length, there's four wires. They're six inches long.

Have a black wire which is your ground. Red wire which is your power. The yellow is the synchronization of flash patterns, and the white is used for simultaneous or alternating flash.It is a surface mount design, and as I mentioned it includes the plastic flange, a nice rubber gasket and the mounting screws for installation. So we're just going to put it together like if you're going to go mount it. Slide your wires through the hole just like that, and put it all together.

Now, they do offer an optional 90 degree aluminum mounting bracket if you also prefer to mount it that way. We do sell that separately on our website. It's listed on the product page as a related product. Here's I happened to pull one. This is what the optional 90 degree mounting bracket would look like.This is four LEDs.

The voltage is 12 to 24 volts. Amperage is one amp at 12 volts. And the dimension, you're going to be looking at overall length of this is right at 4 7/8" long. The height on it going to be right at 1 5/8" tall. And the depth on it is going to be right at 1 3/8" deep.Now, what I'm going to do is we're going to go ahead and hook these wires up and then show you how bright the light is in the different flash patterns. So what we're going to do is we'll take our black wire and hook up our ground. And then we'll take our red wire and hook up our power. And I'm going to turn the power on 12 volt power just to show you how bright it is and the flash patterns, but what I'm going to mention to you is we're going to take the yellow wire, and that's used for synchronization and flash pattern. So what that does is once the light's on, I'm going to touch the yellow wire to the power wire, and it'll change your flash pattern, and it's also used for synchronization. And if you have multiple lights that you want to use on your trailer or your truck, what you'll do is get the flash pattern you want by using the yellow wire. Then you'll connect all the yellow wires of each light together, and they'll all work in synchronization.The white wire is used for simultaneous or alternating flash. I won't be able to show you that, but that's the wire you would hook up for that. So right now what we're going to do is I'm going to turn on my 12 volt power. And you can see there's the light and the flash, the pattern they're using. I'm going to go ahead and turn off the overhead lights, and you can see it's very bright for just four LEDs. And they're all amber LEDs. So what I'm going to do now is take the yellow wire, and if you'll notice when I touch it, it changes the pattern. And then each time you touch it, it will reset the flash pattern. And as I've mentioned, there's 19 different flash patterns that you can use. Here's another time. You can see it's a very bright light.We'll go ahead and turn back on our overhead lights, and we'll turn off our power, disconnect it. But that should do it for the review on the four LED surface mount strobe light with the clear lens and the amber LEDs.


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.