Bulldog Winch ATV Winch Mount - ATV Winch Mount - BDW15151 Review

content loading

Customers compare BDW15151 to these similar products




Products Featured in this Video



Review of Bulldog Winch ATV Winch Mount BDW15151


Today we're going to be taking a look at part number BDW15151. This is the Bulldog Custom Fit Steel Winch Mount for the Polaris Sportsman. This is a custom fabricated steel winch mount. It has a real nice protective finish on it so it is going to stand up really well against rusting and corrosion. The roller fairlead, which is the portion that goes up here on the front, has the rollers on it for running the cable in and out so it doesn't fray the cable or damage, that's going to be sold separately as well as the winch. Everything you see here on the table as well as the set of instructions is what you're going to get with this part number.

This is designed for 2,000 pound to 3,500 pound Bulldog winches. It's going to be designed, or custom fit, for the Polaris Sportsman 550 and 850XP starting in 2009, Polaris Sportsman 400/500/800 starting in 2011, and the Scrambler 850 starting in 2013. It's going to come with the hardware and a set of installation instructions. It's going to walk you through, step by step, through the installation. It's got nice little diagrams down there so you can always follow along and make sure you're getting everything where it needs to go. The hardware it comes with is designed to mount the roller fairlead here at the front so that's going to be two of the bolts and two nuts.

The rest of the hardware is designed to attach the actual winch mount to the frame of the ATV. There's going to be two holes on this side and two holes on this side that are going to attach to the frame. All the holes here on the middle of this bracket line up with the holes here at the back of the mounting cage and then your winch is going to sit in here. Usually your winch, the base would be out here but you're going to twist it so that now the bottom of the winch is against this back plate and then you're going to screw in the hardware. That hardware should be supplied with your winch, with your bulldog winch. A couple of notes to keep in mind is that standard Sportsman 400/500/800 models will require the plastic pan to be cut out for the roller fairlead and then on the Scrambler 850 models, it may require trimming of the front plastic around the winch motor or electrical contacts.

Again, this is a custom fit design, nice sturdy steel construction with that protective finish and it's really going to protect the winch with this kind of a cage design as well as allow you to be able to use it on your ATV with a custom fit bracket and mounting system. That's going to do it for our review of part number BDW15151. This is the Bulldog Custom Fit Steel Winch Mount for the Polaris Sportsman. .


Questions and Comments about this Video

Info for this part was:

Video by:
Joshua S
Installed by:
Cole B
Video Edited:
Chris R
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.