Bulldog Trailer Jack - A-Frame Jack - BD1700100317 Review

content loading

Customers compare BD1700100317 to these similar products

Products Featured in this Video

Review of Bulldog Trailer Jack BD1700100317

Today, we're going to review part number BD1700100317. This is the Bulldog Round A-Frame Jack with the Sidewind Handle and a 5000-pound weight capacity. This Bulldog Jack is ideal for multiple agricultural and commercial applications. This standard A-Frame Jack is a dependable jack which is recognized as an industry standard for a lot of the agricultural and commercial applications. They do use precision fitted parts which will provide exceptional stability and reliability. The mounting bracket which is the triangular piece right here can be welded on or can be bolted on using the three holes.

Now, the holes are 3 inches center to center which is the industry standard for the A-Frame Jacks. The sidewind handle has a smooth ergonomic design for easy cranking and also the outer and the inner tube are painted gray. Now, the footplate and the wheel caster assembly for the bottom which connects to the bottom of the jack is sold separately and if you pull up the product page for this part number usually to the right of the page, it will list the related products and it should show the footplate and the wheel caster assembly. Now, I do want to give you some measurements on this. The clearance which should be measured from the mounting bracket to the top of the jack will measure 14-3/4 inches for the clearance height.

Now, this jack is in the fully retracted position so the retracted height would be from the bottom of the jack to the mounting bracket, and that would measure 8.6 inches. Now, I do want to give you the extended height so the safe time, I pull another exact same jack and crank it up. Here it is in the fully extended position, so if we measure from the bottom to the mounting, it would be 23.6 inches. So to get the lift, if you would take the extended dimension of 23.6 and subtract the retracted dimension of 8.6, that will leave you with a lift of 15 inches so the maximum lift on this jack would be 15 inches. The inner tube is 2 inches in diameter.

The outer tube is 2-1/4 inches. The handle radius which is this measurement right here would measure 6.6 inches. Again, this jack has a lift capacity of 5000 pounds and it does come with a limited five-year warranty. And that should do it for our review on part number BD1700100317.

Questions and Comments about this Video

Info for this part was:

Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.