Review of the Bulldog Heavy-Duty Cast Head Coupler w/ Wedge Latch Video

Thanks for the kind words, happy we were able to help, and the photos are also appreciated! As for the actuator, you are correct that the Atwood 85736 master cylinder is no longer available because Atwood was bought out so your best option is going…

That is correct the inner dimension of the Demco A-Frame Trailer Coupler item #DM14793-95 is 10 3/4 inches. I have attached a picture that breaks down the measurements. You would need to fabricate a spacer on either side to attach this coupler to…

The Demco A-Frame Trailer Coupler #DM14793-97 will require six 1/2" grade 5 bolts with correct washers and nuts to ensure a secure installation. The length of the bolt will be determined by the size of the frame rail that you are mounting to. I…

The etrailer.com #CA-5100-Z A-Frame trailer coupler has a 5000 lb towing capacity and a tongue weight capacity of 700 lbs. I've linked to a product description video for you to take a look at.

I have attached a helpful article that explains trailer hitch balls and their capacities. As the article states, 2 inch balls are typically rated with a towing capacity between 3,500 lbs to 8,000 lbs. A 2-5/16 inch ball is normally rated to be able…

The main difference between the wedge style latches and the trigger latches is in the capacity of the coupler. The lighter capacity couplers will use a trigger latch, whereas the higher capacity couplers will use wedge latches. For example, the…

The Replacement Mounting Hardware for Recovery Tracks for Yakima Ladder Racks part #Y83FR are M8 x 18mm.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…