Brophy Lunette Ring w/ 5-Position Adjustable Channel Bracket: The Breakdown Video

The distance between the two holes you are looking for is 2-1/2 inches. This #PA-1 is designed to attach to a weight distribution shank that has 1-1/4 inches between the mounting holes. I added the dimension to the picture you submitted.

To add a 100 lb tank to your two tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…

I reached out to Demco to get the bolt hole spacing on the Demco Channel Tongue Trailer Coupler #DM13203-52. The bolt holes measure 3/4 in from the top of of the coupler to the center of the hole. This is the same measurement for the distance from…

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

The Brophy ball mount #BH20 is not too much longer than standard length ball mounts so the extra stress it would put on the trailer hitch would be minimal if at all. As long as the trailer hitch on your 2006 Dodge Ram has a tongue weight capacity to…

Technically any additional length is going to increase leverage on the trailer hitch. But there isn't an exact standard length ball mount so going super technical on how much the force multiplied when the ball mount is beyond a certain length is…

The Brophy Lunette Ring w/ 5-Position Adjustable Channel Bracket #BR63ZR is most definitely a weld-on installation and you'll use those holes as a reference point during the installation. A lot of times seemingly random holes like these are what…

Yes, you will want to use safety chains when using a pintle hook such as #C48007. It is a good idea any way just for safety's sake if nothing else. The other issue is that the laws regarding the use of chains can vary from state to state. The…

If the connector portion of the #HM40975-11998 filled up with water it had to have been due to it getting submerged or being installed in an area that gets direct water sprayed on it when traveling in rain. We have never heard of one filling with…

My contact at Titan confirmed that you CAN change out just the inner portion of your Titan actuator ball coupler #T4747220 to convert it to a lunette ring type like #T4748000. The conversion kit you need is part #T4045600183, their Replacement Inner…

The Replacement Inner Slide for Demco DA91 Actuators #DM12808-97 you have pictured is only designed to work with the Demco Hydraulic Trailer Brake Actuator #8759121 or DA91 if you go by Demco's part numbers. It has a 3" x 3" outer…