bing tracking image

Boone Outdoor Patio Accessories - Flags and Flagpoles - 79081 Review

content loading

Review of Boone Outdoor Hitch Accessories 79081

Today we're going to be taking a look at part number 79081. This is the Boone Outdoor Hitch Accessories Game Day Tailgating Drive-up Flagpole. It's going to be the base with the flag holder as well as a bumper protector. This portion right here is going to go under the tire so the under the tire flagpole base rigidly supports your flagpole with the weight of your vehicle. This right here is going to be your snap release pin. This system is going to let you set up and take down really fast. If you can imagine your flag pole would be in this portion here. Now if you don't already have a flagpole and need one, you can find that right here on our website with part number 94999.

That's going to be the Sports Fan Telescoping Fiberglass Flagpole. All you've got to do is remove that pin and then you can remove the flagpole from the base. Also, it has this nice little set screw here, so if you place your flagpole here and you notice you've got a little bit of wiggle room, you can tighten that down and that's just going to push the flagpole to one side which is just going to give it a really nice, tight, secure fit. Go ahead and reinsert that snapper fin real quick. This portion right here is going to go around the flagpole. You want to make sure it's up high enough about where the flagpole will make contact with your vehicle, especially on those windy days. It's got the adhesive backing so once you get that around the flagpole you just push those together after removing that tape and it will stick around the flagpole. Again, on some of those windy days, you just want to make sure that the flagpole, if it was to sway into your vehicle, this is going to keep it from causing any damage to the finish on your vehicle. Take a look at the base.

That's going to give us an overall length of 15 inches, an overall width of 3 1/2 inches. The tube diameter on the inside here, that's going to measure about 1 5/8 of an inch, so you need to make sure that the flagpole diameter does not exceed that measurement. Then the overall height is going to give us a measurement of about 15 1/4 of an inch. This is all steel construction so it's built for strength and durability. Again, you've got that large base here so you can park your car right on top of it and that's going to hold your flag in the upright position. That's going to do it for our review of part number 79081. This is the Boone Outdoor Accessories Game Day Tailgating Drive-up Flagpole Base with a Bumper Protector.


Questions and Comments about this Video