All About the B and W Companion Sliding 5th Wheel Hitch w/ Turnoverball for Chevy/GMC Video

For your 2016 Chevy Silverado 2500 the correct B&W Underbed Gooseneck Trailer Hitch is the part #BWGNRK1016. If you have a short bed truck (less than 8 feet) the center of the 4 inch hole will be located 44-3/4 inches from the rear of the bed. If…

What we can do is provide you with the bolt size that is used to install the part #36408 that you referenced and you can find a tap at a local hardware store to clean the threads out if you think they are too corroded. The bolt size is M12 CL8.8. I…

I reached out to the manufacturer, Buyers Products, regarding the size of the bolts needed to install the Buyers Products 42" x 13-1/2" Gooseneck Hitch Plate with 2-5/16" Ball And Two D-Rings #3373014981. They told me that you will…

On a short bed truck like your 2015 Chevy Silverado 2500 the distance from the rear of the truck bed to the center of where the 4 inch hole will need to be cut is 44-3/4 inches. I attached a link to the install instructions for you to check out as…

The hole for the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 on your 2022 Chevrolet Silverado 2500HD will be either 45-5/16" for a long bed(8') or 37-1/8" for a short bed(6-1/2') to the center of the hole from…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

Hello Gary. For your 2024 Chevy Silverado 2500 HD with short bed it is recommended to have a sliding hitch to ensure that you can get around those really tight turns without damaging the cab of your truck. For a Curt sliding hitch I would recommend…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…