bing tracking image

Aries Automotive Trailer Lights - Utility Lights - AA1501250 Review

content loading

Customers compare AA1501250 to these similar products




Products Featured in this Video



Review of Aries Automotive Trailer Lights AA1501250


Speaker 1: Today, we're going to take a look at the Aries 2-inch Square Flush-Mount LED Work Lights, for a quantity of 2 lights. This pair of 2-inch work lights is designed to be flush-mounted onto a bullbar, a bumper, or other accessory. Each light itself will offer a 2200-lumen flood beam pattern. These are work lights. They use a Grade A Cree LED chip for superior quality. Has a nice rust-free aluminum housing with a rugged, crack-resistant LEXAN lens.

It is durable painted, UV-resistant, mar-resistant finish. Does use advanced optics system to reduce wasted light for 96% reflector efficiency.If you notice the back of them, they are a dual oversize heat sink to help maintain low efficient running temperatures, and it's an instant on and off, requires no warm-up time. They are IP 68 and IP 69K waterproof and dustproof ratings to keep the water and air out. They do pass the CE, the ROHS, the UV extreme temperature, vibration, dust and salt testing. They will operate in temperatures from a -40 degrees Fahrenheit up to 145 degrees Fahrenheit for extreme conditions.It does come with this nice, strong, waterproof wiring harness with the switch on it for reliable connection.

It does include the stainless steel mounting hardware and a couple of rubber seals to install when you go to install these lights. Average lifespan is 50,000+ hours. The lumens I mentioned are 2200 lumens per light. Quantity is for two lights. A few dimensions on this, the light itself is going to be 2 inches by 2 inches.

The face dimensions where the mounting bracket is, overall width edge to edge is going to be right at 4 and 7/8 inches. Top to bottom, 3 and 3/4 inches. The light base itself, overall width is going to be right at three inches, actually 3 and 1/4 inches, and the height is going to be right at 3 inches. The depth of the base is also right at 3 inches.what I'm going to do now is we're going to hook this up to some 12-volt power, just to show you how bright the lights are. I am going to use the harness with the switch on it.

We'll go ahead and take our connectors. These are the waterproof connectors, so we'll go ahead and plug the first light in. Once we get that all plugged in, then we'll take the second light. We'll go ahead and plug that one in. Again, it gives you a nice waterproof seal on your connections. It has the switch right here, so we're going to go ahead and connect our wires up. Then with our wires all connected, you can see if you just push in on that switch, the lights will come on.I am going to go ahead and turn off the overhead lights, just so show you how bright those lights are. With the overhead lights off, we'll go ahead and again take our switch and push it, and you can see how bright they are. Even on the switch, I don't know if you can see, but there's a little red dot that will show you it's on. You can see how bright they are, flood beam pattern. Again, just push it, and the switch will turn it off. Turn back on our overhead lights, but that should do it for the review on the Aries 2-inch Square Flush-Mount LED Work Lights for a quantity of 2.


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.