Tube Step Specs:
Features:
Use your foot to lower this spring-loaded step from beneath your vehicle's rear bumper to easily access gear in the bed. The step bolts on without drilling, retracts under your truck for storage and works with your tailgate open or closed.
Installation Notes:
No drilling required for installation
Trekstep can be installed on either the driver side or passenger side
More Information >Tube Step Specs:
Features:
Use your foot to lower this spring-loaded step from beneath your vehicle's rear bumper to easily access gear in the bed. The step bolts on without drilling, retracts under your truck for storage and works with your tailgate open or closed.
Installation Notes:
No drilling required for installation
Trekstep can be installed on either the driver side or passenger side
More Information >Tube Step Specs:
Features:
Use your foot to lower this spring-loaded step from beneath your vehicle's rear bumper to easily access gear in the bed. The step bolts on without drilling, retracts under your truck for storage and works with your tailgate open or closed.
Installation Notes:
No drilling required for installation
Trekstep can be installed on either the driver side or passenger side
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
The RF controller of your Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR doesn't have an internal battery and requires a 12v outlet for power. If you've already checked the fuse in the power cord and it still…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR is confirmed to fit your 2024 Chevy Silverado 3500. This sway bar will minimize lateral movement in your rear end and improve stability. This sway bar is made in the USA and…
view full answer...With the ends of your Aries Oval Nerf Bars #AAS225041 being sealed and only having the one hole large enough to reach into I recommend using fly tape to insert into the opening you do have. You can then drive around with your 2016 Ram 1500 so the…
view full answer...The Westin E-Series Round Nerf Bars #23-0500 for a 1988-2000 Chevy/GMC C/K install on the frame/body mount. You will actually remove the body mount bolts, then per the instructions, "attach the Bracket to the body mount."
view full answer...To tow your 2022 Jeep Grand Cherokee behind your motorhome, you're going to first need a base plate kit #RM-521440-5. This will get installed directly onto the vehicle and provide the needed attachment point for a set of tow bars #RM-676. You…
view full answer...You will be able to use the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness #41157 to install a 7-way connector in the bed of your 2024 Toyota Tundra. I can see it uses the 7-Way/4-Way Connector #HM40975 which is used on most trucks…
view full answer...Yes, the Aries AeroTread Running Boards #AA2051973 will fit your 2023 Dodge Durango GT Plus as long as it doesn't have the OE side skirting. According to my research it looks like your vehicle doesn't come with that option but you'll want…
view full answer...Hitch accessories end up being mostly secured horizontally in trailer hitches by the tongue weight of the accessory instead of by the hitch pin which is why hitch pin locks like the #e98881 are not not rated for shear strength. At some point it would…
view full answer...It won't fit because the brackets are completely different. The 2008 GMC Sierra's are a different generation than a 2005. GM made some significant changes to their trucks for the 2008-2013 generation. These are designed to be bolted on only,…
view full answer...In regard to installing a tow bar on your 2021 Jeep Wrangler, I highly recommend the Roadmaster Falcon All Terrain #RM-522. This will fit into a 2" receiver and has a weight capacity of 6,000lbs, which will be more than enough for your Jeep…
view full answer...I checked with Erickson and their Removable Motorcycle Wheel Chock item #EM07506 does not have a weight rating. It is made of steel and works with bikes that have up to 6" tires. So long as your Honda and Kawasaki do not have wider tires this…
view full answer...Filter Products (6)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD