Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2"
Retail:$570.51
Our Price: $297.87
You Save: $272.64
Confirmed to Fit
2004 Toyota Tundra
excluding factory towable bumper
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Need help with installation?
Locate installers near me- All Info
- Reviews (24)
- Q & A (0)
- Photos
2004 Toyota Tundra - Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2"
- Class IV
- 2 Inch Hitch
- 7000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 700 lbs TW
- 12000 lbs WD GTW
- 1200 lbs WD TW
- Custom Fit Hitch
Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant Toyota Tundra trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.
Features:
- Trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 7,000 lbs
- Maximum GTW when used with weight distribution: 12,000 lbs
- Maximum tongue weight: 700 lbs
- Maximum TW when used with weight distribution: 1,200 lbs
- Maximum gross trailer weight: 7,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
37130 Draw-Tite Class 4 Trailer Hitch Receiver
Replaces 37034
Item # 37130
Installation Details
California residents: click here
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
- Wrong item was ordered
- Defective
- Did not fit
Customer Reviews
Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2" - 37130
Average Customer Rating: 4.4 out of 5 stars (24 Customer Reviews)
Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.by: John L.04/07/2019
2006 Chevrolet Silverado
Perfect fit, easy installation, fast & free shipping, great quality...happy customer!
Comments
One year later & the hitch is perfect. Itll definitely outlast the truck!
John L - 04/08/2020by: James 09/03/2021
Chevrolet
Works like it should, using it mainly to pull a fire wood hauling trailer.
I had to modify the bumper slightly to move the hitch back far enough to make the spare tire fit properly as I am using oversize tires on the truck, a Chevy K1500 short bed step side. Would not have had to have modified the bumper on a truck with a full length bed.
by: Wayne06/12/2019
1998 Chevrolet Silverado
I purchased this hitch for my 1998 Chevy Silverado last year. The installation was fairly easy with good instruction. The only problem I had was the nut and bolt package was missing some lock washer, so I had to go to a local hardware for the washers. When I notified etrailer they sent me another nut and bolt package, so I have plenty of spares if ever needed.
by: Jim06/25/2019
Well built hitch. When UPS delivered hitch the box was badly damaged and was missing a side bracket, hardware and directions. Contacted etrailer and they shipped me the parts that I needed. Pretty easy install. They would of got 5 stars but when they delivered the second time, still missing the directions. Easy fix. I went to the website and printed them off the site. Definelety would suggest there product. And yes 37130 fits a 2003 Tundra with no issues.
by: Bob02/13/2018
Well....product was very good. Took much longer to receive as thought and packaging was messed up when delivered. The bag with the hardware was apparently opened by someone and was missing 4 lock washers and one nut. Other than that I was satisfied. I have ordered several hitches from this company and never had any issues.
by: George09/19/2020
I got it delivered today and I put it on today took about three hours everything was easy I’m happy with it
by: Mattheus06/29/2021
Great product, and great service from you, thank you.
Comments
Working great. It is on my 93 F150 Flareside, and this was the closest fit, on the market, but it worked out great.
Mattheus - 06/29/2022by: Brandon07/17/2019
2000 ToyotaTundra
everything came in and was fine. instructions, hardware etc. The only problem was I can't even install the item because of the left holes. one side of the hitch has the right hole diameter. But the other side of the hitch has a smaller hole diameter and none of the bolts fit it. I was thinking of just drilling my own holes bigger but I don't know if that will affect the strength of the hitch or make the hitch bolt up unevenly. It would be great if the company sends be another hitch but I doubt it. And I'm definitely not going to pay to ship it back for a return because of a default product.
by: Kenneth 03/15/2020
Easy install !! Fit was perfect !! Brett W @ etrailer gave me perfect advice in choosing the correct hitch for my needs !!
by: Seth08/10/2022
Had to drill holes in my frame,
I thought that sucked.
Works fine.
by: Ronald 11/09/2019
Fast turn around from order to delivery. Easy website to navigate and narrow results to exactly what fits my truck. The hitch was the lowest price I found anywhere. Thank you Etrailer.
by: Tim T09/20/2017
Good Receiver. Fit well. Heavy and solid. Installation easy.
by: George p09/26/2017
2003 ToyotaTundra
Item was delivered on time and in excellent condition.
Easy to order and a great price.
Will use etrailer again.
by: Ernestb05/31/2020
A little difficult with all the pieces however, once we figured it out. It’s worked out well.
I recommend this item to everyone who’s looking to purchase a hitch.
by: Charlie 02/06/2021
It was super easy to install, it works how it should and I am very happy with it.
by: Ken05/31/2019
product fit as advertised, the time stated was correct and directions were clear and easy to understand
by: Greg04/07/2021
Awesome product, bolted right up. No is sues.
by: Rob 01/25/2021
Great hitch
by: Paul05/05/2019
1998 Dodge Ram Pickup
great product and service
by: Stuart 09/07/2022
by: Wayne08/29/2022
by: Ruth 09/15/2020
THANKS FOR YOUR SERVICE
by: Matt 09/30/2022
24
24
See what our Experts say about this Draw-Tite Trailer Hitch
- Installation of Draw-Tite Hitch Receiver # 37130 on 1976 Ford F-150I've attached the installation instructions for the Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2" # 37130. You will first torque the 1/2" nuts to 70 ft•lbs. Then torque the 5/8" nuts to 115 ft•lbs.
view full answer... - Recommended Trailer Hitch Receiver To Replace Factory Tow PKG Hitch Receiver On 2004 Toyota TundraFrom my research it appears there are only two options to replace your factory tow package trailer hitch receiver on your 2004 Toyota Tundra SR5. You can purchase a new one from your local Toyota dealer or you can replace your factory bumper with a non-towing bumper and use an aftermarket trailer hitch receiver like the Draw-Tite Trailer Hitch Receiver # 37130 which offers a 700lb maximum tongue weight rating and a 7000lb maximum trailer weight rating without weight distribution and 1000lb...
view full answer... - What is Highest Towing Capacity Trailer Hitch for 2000 Toyota TundraThe highest capacity trailer hitch we offer for your 2000 Toyota Tundra is the Draw Tite part # 37130 which has a 7,000 lb towing capacity. The price is available at the product link below.
view full answer... - Can Trailer Hitch Receiver Be Installed On 2006 Toyota Tundra With Towable Bumper?I have an option that may work for you, but the only Class IV trailer hitch receiver available for your 2006 Toyota Tundra is the Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2" # 37130 but it will not fit your 2006 Toyota Tundra if you have the factory towable bumper due to the bumper supports being in the way of the hitch. It may be possible to replace the towable bumper on your Tundra with a standard bumper which would allow you to use the # 37130. At this time we do not...
view full answer... - Does Draw Tite Hitch # 37130 Fit 1995 Ford F-150 with Dual Tank SetupThe Draw Tite hitch # 37130 does not have any fit exclusions for your 1995 Ford F-150 for versions that have the dual tank setups so as long as the tanks aren't an aftermarket setup this would work with them.
view full answer... - Will Draw-Tite Trailer Hitch Receiver # 37130 Fit on a 1992 Ford F-150 XLT with Spare Tire MountThere aren't any installation notes talking about having to work around the spare tire mount on your 1992 Ford F-150 XLT so you should be good to install the Draw-Tite Trailer Hitch Receiver # 37130 without doing any. It does require some drilling and will not fit vehicles with factory or aftermarket lower rear fascia or with a rollpan or tube bumper. The installation details have been linked for you to reference.
view full answer... - What Comes with The Draw Tite Hitch 37130What you see in the install instructions is what you would get. In the main product picture we don't have the side brackets shown but they do come with the hitch.
view full answer...
- Round Tube Trailer Hitch Recommendation For A 1999 Chevrolet C/K Series PickupI wasn't able to find any information based off that sticker, however we do have plenty of options that directly fit your truck if you're interested. For your 1999 Chevrolet C/K Series Pickup, I recommend going with the Draw-Tite Trailer Hitch Receiver # 37130. This hitch has very similar weight ratings, and has a higher weight capacity than the hitch you are inquiring about, at 1,200 lbs maxium tongue weight with a WDS, and 12,000 lbs maxium GTW with a WDS.
view full answer...
- Recommended Trailer Hitch Receiver For 1995 GMC Sierra K1500As long as the tire on the 20" spare is the height as the factory tires on your 1995 GMC Sierra K1500, and your truck has the standard or step bumper you will be able to use the Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2" # 37130. This hitch has a 700lb tongue weight rating and a 7000lb trailer weight rating when NOT using a weight distribution system, or 1200lb tongue weight and 12000lb trailer weight if you are using a weight distribution system. Keep in mind that these...
view full answer... - 2000 Toyota Tundra Compatibility with Draw-Tite Trailer Hitch Receiver # 37130I reached out to my contact at Draw-Tite and they believe the Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2" # 37130 will fit your 2000 Toyota Tundra with the factory towable bumper, but they can't confirm it absolutely will fit. They don't have notes on the fit, but assume it may be an issue if there is a hitch ball installed on the bumper. They can confirm the Class III # 75105 will fit. They also said since you are removing a factory hitch, it may change the installation...
view full answer... - American Made Trailer Hitch Receiver for a 2000 Toyota TundraThe Draw-Tite Trailer Hitch Receiver part # 37130 as with all Draw-Tite trailer hitch receivers is made in Mexico. For a trailer hitch made in the U.S.A that is also a confirmed to fit for your 2000 Toyota Tundra, I recommend taking a look at the Curt Trailer Hitch Receiver part # 13184. The Curt trailer hitch receiver is a Class III hitch with a 2" receiver tube opening. The hitch is rated for use with trailers that have a gross trailer weight (GTW) and tongue weight (TW) rating of up...
view full answer... - Recommended Trailer Hitch for a 2001 Toyota Tundra with Towable BumperI do have an option for you but the Draw-Tite Trailer Hitch Receiver part # 37130 will not work for you. The factory towable bumper has different brackets than the non-towable bumper which interferes with the installation of this hitch. Instead, I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75105 as long as you do not have a factory trailer hitch. If you have both a towable bumper and the factory hitch then we do not have any options for you at this time.
view full answer... - Will Draw-Tite Trailer Hitch 37130 Fit 1994 Ford F-150 XLT 4x4 with Step BumperYes the Draw-Tite Trailer Hitch # 37130 is designed to fit a 1994 Ford F-150 with a standard or step bumper so this will work for you. To install a 4 pin trailer connector, use part # 118316. I have attached the installation instructions and a video showing the trailer connector being installed.
view full answer... - Trailer Hitch Receiver Fit on 1993 Chevy K1500 With Step BumperThere are a couple of trailer hitch receivers that fit your 1993 Chevy K1500 with a step bumper, starting with the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41524. It has a 6,000 lb towing and 600 lb tongue weight, does not require drilling to install, and will allow you to keep your spare tire mounted under the bed. If you want a hitch with slightly more capacity for your K1500, you will need the Draw-Tite Trailer Hitch Receiver # 37130. This hitch has a 7,000 lb towing and 700...
view full answer... - Will Draw-Tite Trailer Hitch from 1990 Ford F-350 Fit 1997 Ford F-150All of the Draw-Tite trailer hitches for a 1990 Ford F-350 will fit a 1997 Ford F-250 or F-350 but only certain ones will fit the 1997 Ford F-150, like part # 37130 for example. If you can verify which Draw-Tite trailer hitch part number you have you can either filter through the linked fitguide for a '97 F-150 or let me know and I can check it out so we can see if it is compatible or if you need to purchase a new trailer hitch. Either way, if the trailer hitch you are looking to install...
view full answer... - Trailer Hitch Receiver Options for 1989 Chevy K2500 Long BedThe best option for a trailer hitch receiver on your 1989 Chevy K2500 long bed is the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41524. I like this one over the other options because it is designed as a custom fit for your truck and the cross tube is mostly hidden. It has a 6,000 lb towing capacity and 600 lb tongue weight capacity. Another option is the Draw-Tite Trailer Hitch Receiver # 37130, which has a larger 7,000 lb towing/700 lb tongue weight capacity, but is also a multi-fit...
view full answer...
- Distance Between Mounting Flanges on Draw-Tite Class IV Hitch Part Number 37130The distance inside the two mounting flanges that the larger plates attach to on the Draw-Tite # 37130 are 35-1/2" apart.
view full answer...
- Recommended Trailer Hitch Receiver for Class A Motorhome and Car Hauler TrailerThe Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702 is the highest rated hitch we have for a Class A motorhome. It is rated for up to 6,000 lbs towing when using a weight distribution system or 5,000 lbs without weight distribution. You most likely will need a weight distribution system for your application and if you let me know the trailer capacity and car weight, I'd be happy to make a recommendation.
view full answer... - Will Draw-Tite Trailer Hitch 37130 Fit Around Full Size Spare Tire on a 1996 Ford F-350We have not heard of anyone having trouble with the spare tire when using Draw-Tite trailer hitch # 37130 on a Ford truck like your 1996 F-350. That would indicate that provided the spare is a stock size and not an over-sized spare there won't be any issues. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball,...
view full answer... - Trailer Hitch for a 1979 Buick Estate WagonThere is only one trailer hitch that fits the 1979 Buick Estate Wagon. It is # C12009. But this is a Class II hitch with a 1-1/4 inch receiver rated for 350 pounds tongue weight and 3,500 pounds gross trailer weight. There isn't a higher capacity hitch available for this vehicle.
view full answer... - Front and Rear Trailer Hitch Recommendation for 1997 Chevy C/K Series PickupThe Curt Class V # C15325 that you'd looked at would make a great choice for the rear hitch. The hitch has a 16000 lb towing/2400 tongue weight capacity, so it can handle just about anything you throw at it. If that's more capacity than you'd ever need and would like something a little less expensive, I'd go with the Draw-Tite # 37130 which has a 7000 lb towing/700 lb tongue weight capacity. These hitches will fit assuming you're speaking of a pickup truck and not a cab/chassis model. The...
view full answer... - Are Trailer Hitches and Wiring Harnesses Interchangeable Between 1998 Dodge Ram and Dodge DurangoThe 1998 Dodge Ram 1500 and 1998 Dodge Durango differ in design enough that they require different trailer hitch and wiring harness models. For example, the Draw-Tite # 75081, which is what I would recommend for your 1998 Dodge Durango, is only a confirmed fit for the 1998-2003 Dodge Durango. It is not compatible with any other vehicle. If you are needing a trailer hitch for your 1998 Dodge Ram, I recommend the Draw-Tite Class IV # 37130. This is confirmed to fit this truck and will provide...
view full answer... - Recommendation For Trailer Hitch That Fits A 1997 Chevrolet C/K Pickup With Standard BumperBased on your information, I recommend the Draw-Tite Class IV Ultra Frame Hitch, Item # 41901, which is a confirmed fit for your 1997 Chevrolet C/K Series Pickup with standard bumper. This hitch is specially designed for heavy-duty towing with a maximum weight capacity of 10,000-lbs and a maximum tongue weight capacity of 1,000-lbs. It does not work with short beds. If you have a short bed, I recommend the Draw-Tite Multi-Fit Hitch, Item # 37130. This hitch is specially designed for...
view full answer... - Could Curt Bumper Mounted Hitch # E-3S Fit 2003 Ford F-150To see if the # E-3S would fit the mounting holes of your 2003 Ford F-150 you'd need to compare the dimensions you see in the attached picture with what you have on your truck. This is a universal fit hitch solution so we don't have specific fit info for it on vehicles. Best option would be a frame mounted hitch like the Draw Tite part # 37130 which we can guarantee is a fit and also will have much higher towing capacities.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-636-245-5329
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.