To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Fully welded Chevrolet Colorado trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Installation requires removal of the impact structure, which will be replaced with the hitch for support and safety. No drilling required for installation , Requires temporary removal of bumper/fascia during installation , For vehicles with factory installed step bumpers only , With this hitch installed the step bumper is no longer able to be used as a towing point
California residents: click here
Complete Towing Package for 2022 Chevrolet Colorado
Customers compare 75948 to these similar products
2022 Chevrolet Colorado Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Colorado Trailer Hitch Accessories
Average Customer Rating: 4.8 out of 5 stars (46 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
This item was a godsend at a time when seeking an appropriate item for my truck was becoming very difficult. I searched and searched and all were almost compatible but no one at any of these companies could verify if this would fit my truck specifically, until I happened to stumble upon this company. They answered all my questions and guaranteed me it would fit/ and it did and I could not be happier. If and when I get a new truck I’m coming back her for my hitch and tow needs no doubt!
Shipping was very fast. I installed the hitch and wiring harness over the weekend. The instructions were easy to follow. I did it myself; however an extra set of hands would have made it a little easier. The DrawTite hitch is more substantial than the original bumper support. It fit perfectly. The Hopkins wiring harness was easy to hook up and it looks like an OEM part. I’m very happy with my purchase.
I want to give you guys 5 stars, but the quality control is not the best, unfortunately it was not covered in the right way when you shipped the trailer hitch and this can cause rust soon. But fits perfect
I installed the hitch reciever and the 4 and 7 pin plug but what's the wiring harness I'll need? I figured that would be with the plug.
Fast shipping! Easy installation!
Received as listed shipping was fast
First of all, the delivery of this trailer hitch receiver was quick. It came well packaged, all the parts needed in addition to the electrical connection which was ordered, were included int he box with the hitch. It was just as described in the advertisement and installation was just as viewed in the video on you tube. the installation was easy and the wiring was correctly color coded to my truck. I recommend etrailer for all your towing needs. I will use thin again in the future!
First off, I can hardly believe how quickly my order (hitch receiver, ball mount and wiring kit) arrived. I ordered it Wednesday during business hours, selected standard shipping (free) and it was waiting for me at home on Friday afternoon. I installed it all this morning. As others have mentioned, it definitely takes longer to remove the factory parts than it does to install the new parts. Make sure you have an extension for your socket set to make getting the rearmost bolt out/in of the frame easier. One thing to note, the installation videos that were suggested to me for this hitch receiver said that the spare tire cradle could not/would not be re-installed, however, this particular hitch has a flange that allows for the cradle to be reinstalled again. All you have to do is pop off the threaded clips from the factory receiver and install them on the new receiver. This can be done easily using a flat screw driver. One other "tip & trick" is that the shipping box that the receiver came in can be used as a nice cushion on the garage floor to give you some insulation/padding if you're not fortunate enough to have a lift at your disposal. Just pull out all the staples and flatten the box, presto-chango, there you go!
Shipping and delivery were exceptionally fast. Some cosmetic damage on the coating but the hitch is going under the truck anyway. 5 stars!!
I just finished installing my Draw-Tite hitch to my new Colorado and the whole process from purchase to final installation was a breeze.
The hitch arrived two days from when I ordered with a very thorough set of instructions. I also watched a youtube video to familiarize myself with the install.
I highly recommend etrailer.com Great pricing and fast shipping is a winning combo.
Hitch went on without issue. Removing factory parts took infinitely longer ! Definitely easier with 2 people. Hitch looks great, I chose the round bar to match my Westin step bars. Also installed the Hopkins HM40975-11998 wiring kit that fits in the factory bumper cut out it looks super clean with no dangling wires. Watched the 2 videos a few times (hitch and wiring) and it took about an hour and a half to install both.
For the 2018 Chevy Colorado, everything went very easily. The only hard part was removing the original bolts on the factory hitch and bumper. An impact wrench is suggested, but it would be harder with the bumper bolts. I suspended the bumper with cords from above rather than jack stands. The bumper is very light and cords from above give much more flexibility to fit the new bolts in place. Did the whole job without a lift and entirely by myself. Nothing heavy or requiring a second or third person. The electrical hookup was the simplest ever with the factory wiring already in place. No need to get into the tail lights. All excellent.
A few 3/8 inch chips in the powder coat of hitch. Was an easy install once all the old parts were out of the way.2020 Colorado
Easier to install than we expected. The Chevy Colorado has a bar behind the bumper that must be removed before installing the hitch. It wasn't as difficult as we expected. The hitch seems to be great quality and heavy duty.
works great
Very easy to install. It arrived with some large areas where the powder coating had been chipped off. Had to prime and paint before installation, But otherwise can’t wait to use it to tow a new camper we purchased.
I hired the Installation due to my Age and physical capabilities! All fit and was easily to install!
The ordering was easy, came when was promised. It fit well, instructions were good. All works great.
Very good company to deal with.
Thank you
The hitch was an exact fit for the truck it was purchased for and delivered in excellent condition. Dealing with etrailer.com has been easy and the hitch was a very good value. This is the 2nd purchase I've made from etrailer.com and I will go back to them again if needed. Recommend them highly.
I really like it. Works great and fast in getting to my house in a day. Thanks! Matt
Matt
4/27/2019
Only had to use it once but I plan to get a bike rack so that I can haul my bike.
Excellent quality. Return customer because i am always pleased with etrailer in every aspect.
Item works as it should and wasn't to bad to install. Asthethically it seems as if it's under engineered because of the side plates that are on the factory part but not this upgrade.
Great product and fast delivery
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
11/30/2018
If you need a 7-way plug on your 2018 Chevrolet Colorado I recommend part # C55774. This curt connector plugs into the OEM tow package on the Colorado. If the vehicle does not have an OEM towing package then you will need part # HM11141144 which will hardwire into the trucks bare factory wiring at the rear of the truck.
Helpful Links
Custom-Fit-Vehicle-Wiring/Curt/C55774.html
Custom-Fit-Vehicle-Wiring/Hopkins/HM11141144.html