2005 Chevrolet Silverado 1500 - 8 Foot Bed Tonneau Cover

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4…

The Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A93VR is designed to fit the youru 2022 Ram 3500 with a 8' dually bed. The Cover #A37FR will only fit an 8' bed with single rear wheels. This is the only difference in these…

Yes, the Universal Above-Bed Base Rails #DM6071 will fit your 2023 Ford F-350. This part number is just for the rails so for the full kit you need the #DM72GV. This includes the 6071 base rails along with the custom mounting brackets for your F-350.…

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

Thanks for all of the info you listed from the RV's Rota Flex pin box. Based on that the pin box model style is the Lippert 1621 so for a Gen-Y gooseneck adapter the correct part number is the #325-GH-8045.

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

GM only made a 5.5', 6.5', and 8' bed length for their 2018 Silverado 1500 models. If you're measuring the outside of the bed and not the inside from the bulkhead to the tailgate you'll get a longer length like the 84"…

Per TruXedo, the rails of the TruXedo Sentry CT Hard Tonneau Cover #TX1579616 are going to protrude 3" into the bed from the edge of the bedrails on both sides.

The Rhino and the 1621 pin boxes are different enough that the Gen Y goooseneck adapters #GY98GR and the part #325-GH-8045 are not interchangeable since they are designed for either pin box.