Expert Review Video:
Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the rear axle and to the frame to balance weight transfer and reduce body roll.
Installation Notes:
No drilling required for installation
Retains factory swaybar
Product fits vehicles with a V8 or a V10 engine
Installs 1/2 inch plate using factory u-bolts, which may not be long enough: measure and add 1/2 inch to be sure. Replace square u-bolts with RM-590050-00, or round with RM-590050-10.
Tech Tip:
Product does not fit Thor Outlaw.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and make your vehicle easier to control with this unique kit. The anti-sway bar mounts to the front axle and to the frame to balance weight transfer and reduce body roll. The TruTrac rod keeps your axle in line to prevent wander.
Installation Notes:
Drilling required for installation
Tech Tip:
Product contains both the RM-1259-105 anti-swaybar and a front trac bar for added stability.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and make your vehicle easier to control with this unique kit. The anti-sway bar mounts to the front axle and to the frame to balance weight transfer and reduce body roll. The TruTrac rod keeps your axle in line to prevent wander.
Installation Notes:
Drilling required for installation
Tech Tip:
Product contains both the RM-1259-105 anti-swaybar and a front trac bar for added stability.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the front axle and to the frame to balance weight transfer and reduce body roll.
Installation Notes:
Drilling required for installation
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the front axle and to the frame to balance weight transfer and reduce body roll.
Installation Notes:
Drilling required for installation
More Information >Features:
Attach these durable, flexible polyurethane bushings to the front anti-sway bar of your vehicle and experience a better, more controlled ride.
Installation Notes:
No drilling required for installation
Product fits vehicles with a V8 or a V10 engine
Tech Tip:
Product is replacement kit for vehicles with 1-5/8 OEM bar.
More Information >Features:
Attach these durable, flexible polyurethane bushings to the front anti-sway bar of your vehicle and experience a better, more controlled ride.
Installation Notes:
No drilling required for installation
Product fits vehicles with a V8 or a V10 engine
Tech Tip:
Product is replacement kit for vehicles with 1-5/8 OEM bar.
More Information >Videos
for Anti-Sway Bars
Help Articles
for Anti-Sway Bars
Expert Answers
for Anti-Sway Bars
Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…
view full answer...The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to…
view full answer...The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you…
view full answer...In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please…
view full answer...The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148…
view full answer...I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the…
view full answer...For a 2023 Entegra Odyssey 24B on a Ford E-450 chassis you would need the Roadmaster Front Anti-Sway Bar - 1-3/8" Diameter #RM-1139-189 and rear #RM-1139-147. If you also wanted to add in a steering stabilizer then you'd need…
view full answer...Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most…
view full answer...We do have that exact lube with the Aqua Lube part #RM-400-011-30.
view full answer...We have the Roadmaster Exact Center Steering Stabilizer part #RM47MR that fits your 2021 Jayco Greyhawk 27U that has an OEM factory damper and would work really well to improve handling.
view full answer...If there isn't a way to access it from the inner side of the frame or from the side then it would have a weld nut in frame and you would be able to just remove the bolt normally. There unfortunately isn't a guide that shows…
view full answer...I recommend starting with the Roadmaster Rear Anti-Sway Bar, #RM-1139-147. This will reduce side-to-side movement for a noticeable improvement in your vehicle's stability and reduced body roll. For the front, I recommend the Timbren…
view full answer...Filter Products (14)