What our customers are saying:
I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex
Alex
Blowing Rock, NC
Videos
for Car Seat Covers
Help Articles
Expert Answers
For your race trailer with aluminum roof panels it will seal on the edges with a Butyl Tape #AL64UV. Then you will use either a Non-Sag #AL33KV or Self-Leveling #AL68KV sealant to seal the mounting screws and edges of the aluminum roof panels to…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Edward, so B and W has a Companion hitch that fits directly to the OEM pucks of your 2023 GMC Sierra 3500 with the part #BWRVK3710 so what that means is you have two options. You could go with the #BWRVK3710 and sell your old hitch second hand to…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
The only real difference between the Alpha Systems #AL74UV and the LaSalle Bristol #3441700534142711440 is that the Alpha Systems is made of TPO which is a bit less flexible than Elvaloy-based PVC that #3441700534142711440 uses; PVC is going to be a…
Hey Andrew, for a mostly hidden trailer hitch that fits your 2024 Toyota Sienna XLE we have the EcoHitch part #EH22SR which only has the lower hitch opening hanging below the rear bumper. We do not have a totally hidden option.
Hello Jim, I just checked with my contact at Thule. The Replacement Non-Locking Ratchet Arm Assembly #753357902 will fit your older Thule 515-5190 bike rack.
There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
Yes, you can use the Draw-Tite #DT78MR to replace the factory hitch on your 2023 Jeep Wrangler 4xe. The Draw-Tite hitch will be rated for higher tongue weight (675 lbs) than the OEM hitch. It will be an easy bolt-on install. I have linked our install…
The safety chain hangers are mounted in different locations is the only difference between the Hidden Hitch item #DT98GR and item #DT97YR. Both hitches are confirmed to fit a 2023 Toyota RAV4 hybrid. They have a removable 2" receiver, with a…
Hey Perry, so due to the door style that is at the rear of a 2023 Mercedes Sprinter the Inno tilt cargo carrier part #IN94MR wouldn't allow the door to open as it would sit up too tall even folded down but I do have a similar solution that would…
Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer and…
