Search: wireing diagram   >  

You would have to make an adapter since a 7-way female to 7-way female adapter isn't made. For wire you would need the part #DW04914-1 (sold by the foot). Then for 7-way connectors you would want the part #PK12703.

When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it. If you are looking at the inside of the trailer connector…

The easiest way to install your Tekonsha Prodigy P3 #90195 is to use the Tekonsha Plug-In Wiring Adapter #3024-P. This adapter will not require and cutting or splicing into your 2016 Ram 3500's factory wiring. If you need to hardwire install the…

Yes, we do have a generic brake controller wiring diagram on our Brake Controller Information page. I have added a link to it below. The bundle of wires you are looking for should contain the following: white with red stripe, blue with white stripe,…

The Tekonsha #118379 does include a taillight converter, it is the black plastic box mounted inline on the wiring harness. Your Tacoma uses what's called a separate, or 3-wire taillight system where the running lamps, brake lamps and turn signal…

The overall diameter of a mounted and inflated tire in size 5.30-12 such as #AM30780 will be 21.9-inches. The tire size 145/80-12 such as #AM31202 is just slightly smaller in overall diameter at 21.3-inches. In each of these tire sizes we offer…

The Ford Replacement OEM Tow Package Wiring Harness, 7-Way, item #118242, fits the following vehicles. 2000 - 2003 Ford F-150 Stepside Models 1997 - 1999 Ford F-150 and F-250 Light Duty Stepside Models 2004 - 2004 Ford F-150 Heritage Series Stepside…

The four wires and their functions are: White: Ground wire, connected to negative side of battery. Blue: Electric brake wire, ran to the brake output circuit of your 7-way with 10 gauge wire like #10-1-1 sold by the foot. Black: 12v power wire,…

Actually the Curt wiring harness that you are referring to, part #C51515 is just a harness that gives the connector 4 blunt cut wires for to use for splicing into a vehicle. The Tekonsha controllers actually include those connectors with their…

Most if not all trailer wiring harnesses/connectors use larger wires for the 12 volt and ground circuits compared to the other circuits (lights). The sockets themselves don't have an amperage rating so you will go by the draw of the things…

Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…