This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a parking light and the center LEDs are a turn signal and brake light. Mounts in a cutout using a grommet (sold separately) and works with 3-prong plugs. 15/16" thick Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need? This GloLight has a standard 3-prong plug that connects
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts to the surface of the trailer with the built-in flange, and hardwires to trailer. amps Brake/turn signal light: 0.59 amps Lifetime warranty on LEDs
This snap-on trim ring adds a finished look to your Optronics STL68RB flange-mount tail light by concealing the hardware used to install the light. Durable, rustproof stainless steel construction.
Hello Andrei, There isn't an axle we can offer as there aren't any that small we have, but you may be able to get a different hub. I couldn't find the bearing sizes of that axle to find a new hub so you'll have to do a bit of…
Hallo Karl, danke, dass du dich gemeldet hast. Der Draw-Tite #75235 ist die richtige Passform für den Toyota RAV4 Hybrid 2017. Draw-Tite bestätigt, dass dies für alle Modelle des RAV4 2017 gilt, auch für den Hybrid. Das unten…
If you want to convert to a 5 on 5 bolt pattern the only option is for 3,500 lb axles. Assuming you have #L68149 inner and #L44649 outer bearings you could use #AKIHUB-550-35-EZ-K for an idler hub or #AKHD-550-35-EZ-K for a hub and drum assembly. If…
I checked our inventory and it looks like we do not offer a hub with an outer bearing that will match the outer bearing dimension on your trailer spindle. That probably means you'll have a really hard time finding replacement parts, since we do…
I went out to the warehouse and checked our stock of hub and drum #84656uc3. All of the units are just as you have described and the races are installed correctly. If you are looking at the inner race from the back side of the hub and drum, there…
From my research on the Coleman TSR Air Conditioning units, the MaxxAir TuffMax Replacement Shroud #MA00-325001 works. I've provided a diagram that shows the dimensions of the shroud and if you can verify that your unit is that size, the MaxxAir…
You definitely could use the Thinline LED Trailer Tail Light #STL59RB as a standard trailer stop/turn/running light on the sides of your trailer as all of those functions are supported on this light. If you check out the picture I attached you can…
Hi Jose, If you're saying you want to switch both tail lights to LED light strip-style tail lights then I have a few recommendations depending on the length you'd like: 12-5/8" long x 1" wide x 1/2" tall: Thinline LED Trailer…
The old Bargman L400 series locks you have on the trailer currently haven't been made for a very long time and apparently due to their rarity and how desirable they are people sell them for quite a bit of money when they can find them. I…
On the Lippert Power Stabilizer Jack #LC298707 for your Forest River Evo Trailer Trailer there should be a 20 amp (or higher) fuse/breaker located inline with the red power wire coming from the switch before it reaches the battery. Check to make sure…
Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…
Grease seal set #RG06-050 is what you will need. These are double lip seals, just like what you have (the spring indicates that) and the dimensions are all the same including the 1/2 inch width.
Filter Results
