Imagine prepping for your trip and having your braking system ready in less than a minute. With the RVibrake 4, the audio assistant guides you step by step, so there's no fumbling or guesswork, just a quick and reliable setup every time.How Does the RVibrake 4 Work? The RVibrake 4 has a built-in inertia sensor that knows when your motorhome slows down. As soon as it senses that change, it presses your toad's brake pedal at the same time and with the same force you apply up front.
Think of it as a one-time project that pays off on every trip. Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.Also, you don't have to find a place to store them between trips. How Does the Curt RVibrake Shadow 2 Work? The RVibrake Shadow 2 uses an inertia sensor to activate. As your vehicle slows, the Shadow 2 senses the change in momentum of your toad.
... It connects at the breakaway switch and wirelessly signals your RVibrake 3 or 4 and Bullseye Monitor, giving you full breakaway protection with a simpler install.It physically connects at the breakaway switch, then wirelessly sends the breakaway signal to your RVibrake portable braking system and your Bullseye Monitor. If the breakaway switch is activated, you get an alert on the Bullseye Monitor and the RVibrake portable unit is signaled to apply the brakes.
Battery drain can catch you off guard when you're flat towing. The CURT RVi Battery Charger+ keeps your toad's battery charged while you drive, shows real-time status, and helps you avoid the frustration of a dead battery when you unhook.Features to know about Prevents Parasitic Battery Drain While Flat Towing Many towed vehicles draw power while being flat towed, which can slowly drain the battery before you ever reach your destination. The Curt RVibrake Towed Battery Charger+ is designed to prevent that unseen parasitic loss by helping keep your towed vehicle's battery charged while you drive.
Replace your lost or damaged Curt RVibrake 3 Command Center tablet. Direct replacement restores full monitoring and control of your RVibrake 3 system.Features: Replaces the command center tablet for your Curt RVibrake 3 system Lets you monitor and adjust your supplemental braking system from inside the RV Direct replacement if your original tablet is lost or damaged Simple plug-and-play setup for easy restoration of control Fits: Curt RVibrake 3 Command Center systems
Replace a worn breakaway system or add one to a second toad for easier RVibrake transfers. This complete replacement kit restores emergency braking protection and keeps your flat tow setup ready for the next trip.Highlights Direct Replacement for RVibrake Systems: Designed to replace the original breakaway system on any RVibrake flat tow braking setup. Set Up a Second Toad: Install on another vehicle to make transferring your RVibrake Portable system quick and simple.
Stay in control with a replacement Bullseye Monitor for your RVi braking system. Get real-time braking updates, instant alerts, and a manual brake button so you always know what your toad is doing and can respond when it counts.Wireless Simplicity: Easy setup with no cords running through your RV cab. Works With Your RVi System: Pairs with RVibrake 4, Shadow, Shadow 2, Towed Battery Charger +, and Breakaway Wireless Adapter. Warranty Backing: Limited lifetime warranty with one-year finish and one-year parts coverage.
No available 12V outlet for your RVibrake? This kit adds a dedicated power source wired directly to your toads battery, so your portable braking system runs reliably every time you tow.Highlights Power for RVibrake When No Outlet Is Available: Adds a dedicated 12V outlet so your RVibrake Portable Flat Tow Braking System has a reliable power source.
This replacement 3' flat micro-USB cable restores the power connection for your Curt RVibrake Command Center tablet and hub.Features: Replaces the power supply cable for your RVibrake Command Center tablet and hub Keeps Command Center tablet charged during travel Flat design allows the cable to be rolled up for compact storage 3' Long cable with USB to micro-USB connection Fits: Curt RVibrake 3 Command Center systems
This block extension gives your RVibrake 3 or RVibrake 4 a dependable surface to push against in select Ram trucks, helping the braking system perform smoothly and consistently during flat-towing.Highlights Stable Brake Mounting Surface: Creates a solid anchor point for your RVibrake system. Works With RVibrake 3 & 4: Designed for both portable flat tow brake models. Adjustable Extruded Bar: Lets you fine-tune the width for a custom fit.
When your RVibrake 3 or 4 hits the brakes, it needs something solid to push against. The stop plate bracket installs in minutes, fits most vehicles, and keeps your system working reliably every trip.Highlights Secure Braking Performance: Provides a solid surface for your RVibrake 3 or 4 to push against during activation. Built for RVibrake: Designed specifically to pair with RVibrake 3 and RVibrake 4 systems.
Some vehicles call for the battery to be disconnected before flat towing. This heavy-duty disconnect gives you a clean, reliable way to cut power at the terminal, then restore it in seconds when its time to hit the road again.
Between trips, your RVibrake often ends up riding in a storage bay with the rest of your gear. The Roadie Soft Shell Case keeps it protected from dust, bumps, and shifting cargo so its ready to go when you are.Compact, Purpose-Built Fit: Measures 18" long x 12" wide x 5-1/2" thick to fit your RVibrake system without wasting storage space. Backed by Warranty: Includes a 1-year warranty for added peace of mind. Features to know about Protect the Equipment You Rely On Every Trip Your RVibrake portable system moves in and out of your toad every time you tow.
Not every dash is made for mounts. The Curt RVi Bean Bag Dash Mount gives your Command Center tablet a stable, magnetic base that works anywhereso you always have the view you need.
Keep your RVibrake Command Center tablet or phone right in sight on your dash with this magnetic dash mount featuring a sticky-gel suction cup that clings to most non-porous surfaces for steady viewing on the road.
Mount your RVibrake Command Center hub almost anywhere in your RV using this strong magnetic wall mount for quick access, better visibility, and tidy placement during your flat-towing adventures.Simple Setup: Just place the magnet mount and attach the hub. Works with RVibrake Command Center: Designed specifically for the RVibrake hub.
Replaces the pedal claw for your Curt RVi Series 3 or Series 4 (52202) portable flat tow braking system. Also works with RVibrake 3 portable flat tow braking system (50MG0004).Features: Replaces the pedal claw for your Curt RVi Series 4 (52202) portable flat tow braking system Also works for RVibrake 3 portable flat tow braking system (50MG0004) Fits: Curt RVi Series 4 portable flat tow braking systems: 52202 RVibrake 3 portable flat tow braking system: 50MG0004
Keep your RVibrake Command Center tablet and phone powered up at home or on the road with this 2-in-1 wall and vehicle charger, so your flat-towing setup stays ready for the next getaway.
This heavy-duty tow bar is easy to maneuver, with a swivel head joint that lets the arms twist left and right. Non-binding levers let you disconnect at the campsite, even on rough terrain. Extra-long arms help you make tight turns.
Plug-and-play: this permanent system gets you automatic braking with a one-and-done installation. Actuator box installs out of your way under the front seat. Adjustable pressure setting for comfortable braking. Charges car battery while towing.
Filters
