Add a secure place to stow your jack's crank handle. This weld-on handle clip is an easy add-on for etrailer and Ram square, direct-weld jacks that often ship without a clip. ... Features: Add-on handle clip for etrailer and Ram square, direct-weld jacks Ideal for jacks that do not include a factory handle clip Secures the crank handle during travel to help prevent movement and noise Works with 10,000 lb and 12,000 lb lift models Weld-on installation Fits: 10,000 lb Lift jacks: e34FR, TJD-12000SP-F2, e66FV, TJD-12000SP-R2NH, TJD-12000SP-R2, TJD2SP-12000SP-F, e26FV, e79FV 12,000 lb Lift jacks: e45YV, TFDDP-20000SP-F, TFD-15000SP-F
... Heavy-duty jack screw can lift up to 5 tons.But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity. Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up.
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 27-1/8" Retracted 41-7/8" Extended Total lift: 28-3/4" Screw travel: 15" Drop leg travel: 13-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Lift capacity: 12,000 lbs Support capacity : 15,000 lbs Total travel: 28-3/4" Screw travel : 15" Drop leg travel : 13-3/4" Overall height: 27-1/8" Retracted 41-7/8" Extended Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" on center Jack screw diameter: 1" 1-Year warranty
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Replaces the ACME threaded rod and threaded nut on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity and a 12,000-lb static capacity. Designed for TJD-12000 Series jacks.Features: Replaces the threaded ACME rod and lift nut from your etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity and a 12,000-lb static capacity Designed for TJD-12000 Series jacks Includes: 1 ACME rod 1 Lift nut Specs: Lift capacity: 10,000 lbs Static capacity: 12,000 lbs Overall dimensions of rod: 17-3/4" long x 1" diameter Lift nut fits 3-1/2" x 3-1/2" square jack inner tube Note: This replacement rod and nut will not work on your jack if you do not have an octagonal bushing as shown below - typically if your jack is older than 2014.
Replacement jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Welds on.Features: Replaces 1 Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Welds on Provides stability with large, pivoting footplate Black paint finish Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Foot pad: 10" long x 10" wide Quantity: 1 leg 1-Year warranty
Replacement right/street side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the right-side RAM square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and left leg (e63VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Bolts on using built-in, pre-drilled mounting tabs Provides stability with large, pivoting footplate Black paint finish Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Foot pad: 10" long x 10" wide Mounting tabs: 7-1/2" x 4" Quantity: 1 leg 1-Year warranty
Replacement left/curb side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the left-side Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and right leg (e73VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Bolts on using built-in, pre-drilled mounting tabs Provides stability with large, pivoting footplate Black paint finish Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Foot pad: 10" long x 10" wide Mounting tabs: 7-1/2" x 4" Quantity: 1 leg 1-Year warranty
Say goodbye to annoying cranking! This smooth and powerful 12K hydraulic jack does all the hard work for you. Plus, it comes with everything you need. Easy, bolt on installation and you won't break a sweat next time you are hooking up!
Say goodbye to annoying cranking! This smooth and powerful 12K hydraulic jack does all the hard work for you. Plus, it comes with everything you need. Easy, bolt on installation and you won't break a sweat next time you are hooking up!
Replaces the right jack leg for your Bigfoot 12K hydraulic jacks.Features: Replaces the right jack leg for your Bigfoot 12K hydraulic jacks Works with all 12K square leg Bigfoot hydraulic jacks Includes jack leg - foot, cylinder, and pump not included Made in the USA Specs: Footplate dimensions: 10" long x 10" wide Mounting bracket dimensions: 4" long x 7-1/2" wide
Replaces the left jack leg for your Bigfoot 12K hydraulic jacks.Features: Replaces the left jack leg for your Bigfoot 12K hydraulic jacks Works with all 12K square leg Bigfoot hydraulic jacks Includes jack leg with foot Cylinder and pump not included Made in the USA
Need new hydraulic drum brakes that fit on your Dexter, Lippert, and AL-KO/Hayes axles? Look no further. 7" x 1-3/4" Assemblies fit wheels 16" or larger. 4-Bolt pattern backing plates. Made in the USA.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 5" Assemblies have rust-resistant, e-coated backing plates and dust shields to protect from debris. Fits 15" or larger.
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12-1/4" x 5" Assemblies fit 16" or larger wheels. Backing plate has a 7-bolt pattern. Made in the USA.
Self-adjusting electric trailer brakes measure 12-1/4" x 5". Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.
Self-adjusting electric trailer brakes measure 12-1/4" x 5". Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.
Self-adjusting electric trailer brakes measure 12-1/4" x 5". Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. Dual-plunger cylinder offers great braking power. 12-1/4" x 5" Assemblies fit 16" or larger wheels. Made in the USA.
Machine-finished rotors and e-coated calipers and mounting brackets are included in this 2-wheel-assembly disc brake kit. Designed for 12,000-lb ALKO axles with #120 spindles.
Say goodbye to annoying cranking! This powerful 12K dual point hydraulic jack set does all the hard work for you. Plus, it comes with everything you need. Easy, bolt on installation and you won't break a sweat next time you are hooking up!
Say goodbye to annoying cranking! This powerful 12K dual pump hydraulic jack set does all the hard work for you. Plus, it comes with everything you need. Easy, bolt on installation and you won't break a sweat next time you are hooking up!
Say goodbye to annoying cranking! This powerful 12K dual point hydraulic jack set does all the hard work for you. Plus, it comes with everything you need. Easy, bolt on installation and you won't break a sweat next time you are hooking up!
Filters
