When your bike rack blocks the rear hatch, this swing-away adapter moves the load to the passenger's side so you can still reach your gear. Its sealed ball bearing pivot supports up to 250 lbs and keeps the rack swinging smoothly at stops.Highlights Rear Access with Gear Loaded: Passenger-side swing-away design pivots bike racks or cargo carriers away from rear cargo areas. Two Open Lock Positions: 90º and 120º pivot positions give rear doors and cargo areas more usable opening clearance. 250 lbs Gear Support: Rated capacity handles loaded hitch-mounted setups where heavy racks or cargo need room to swing out.
... When your bike rack blocks the rear hatch, this swing-away adapter moves the load to the driver's side so you can reach your gear. Sealed ball bearing pivot supports up to 250 lbs and keeps the rack swinging smoothly.The Pivot v3 uses Kuat's patented Flatlock Hitch Cam to tighten the connection at your receiver and reduce rattle between hitch components.
... Just press the button on the corded remote control to lift and lower your trailer. The large, pivoting foot pad stabilizes the jack even on rough terrain.Features: Hydraulic jack Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Smooth and effortless operation, even for heavy loads Self-contained pump and power unit comes attached to the jack Convenient corded remote control switch Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs 500W 12V DC dual motor Reservoir capacity: 2.5 quarts Maximum pump load: 3,000 psi Working pressure: 1,500 psi Mounting tabs: 7-1/2" x 4" Foot pad: 10" long x 10" wide 1-Year warranty
Powerful hydraulic jack with self-contained pump and power unit lets you lift heavy loads with a press of a button. Pivoting foot pad stabilizes the jack on rough terrain.Features: Hydraulic jack contains everything you need to lift your trailer quickly and safely Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Self-contained pump and power unit comes attached to the jack Pump offers up to 3,200 psi extension and 1,500 psi retraction pressures Pivoting foot pad stabilizes on uneven surfaces Square tube with durable exterior-grade black finish bolts onto your trailer's frame Specs: Bracket height: 30-3/4" Retracted 50-3/4" Extended Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Maximum hydraulic flow rate: 2 GPM Maximum pressure: Raising: 3,200 psi Lowering: 1,500 psi 3-Year warranty
The counter-balance valve integrated into this hydraulic jack eliminates drift and retraction while your trailer is stationary. It's ideal for a seasonal trailer that may sit for awhile, and it makes a great upgrade. Right/street-side leg only.Features: Hydraulic right/street-side jack leg works with your existing hydraulic setup Hydraulic pump and power unit (e43VV) and left/curb-side leg (e83VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Integrated counter balance valve eliminates drift and retraction Great for seasonal trailers Smooth and effortless operation, even for heavy loads Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Mounting tabs: 7-1/2" x 4" Footplate dimensions: 10" long x 10" wide 1-Year warranty
The counter-balance valve integrated into this hydraulic jack eliminates drift and retraction while your trailer is stationary. It's ideal for a seasonal trailer that may sit for awhile, and it makes a great upgrade. Left/curb-side leg only.Features: Hydraulic left/curb-side jack leg works with your existing hydraulic setup Hydraulic pump and power unit (e43VV) and right/street-side leg (e23VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Integrated counter balance valve eliminates drift and retraction Great for seasonal trailers Smooth and effortless operation, even for heavy loads Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 35-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Mounting tabs: 7-1/2" x 4" Footplate dimensions: 10" long x 10" wide 1-Year warranty
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud. Premium zinc finish offers great rust protection. 10" Screw travel and 8" drop leg.Fast, Easy Setup with Minimal Cranking Once you've arrived at your destination, setting up is a breeze thanks to the quick-release jack tube on the Ark Extreme jack. Just tug the spring-loaded handle to quickly drop the jack tube to your desired height. This handle allows you to set the jack in 1 of 4 positions.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg.Fast, Easy Setup with Minimal Cranking Once you've arrived at your destination, setting up is a breeze thanks to the quick-release jack tube on the Ark Extreme jack. Just tug the spring-loaded handle to quickly drop the jack tube to your desired height. This handle allows you to set the jack in 1 of 4 positions.
Rear access gets complicated once bikes or cargo are on your hitch, especially with heavier gear. Tilting racks still get in the way. This swing-away adapter lets you move the rack aside and completely open the tailgate or rear doors.That makes a difference when space is limited and access needs to be quick. Accessory and Spare Tire Compatibility The Pivot XD is designed to accept add-ons like the Accessory Hoop with MOLLE panel for mounting gear, as well as a Spare Tire Adapter that attaches to the hoop.
This hitch extender converts your existing Kuat bike rack into a swing-away rack. It rotates out 90 degrees or 120 degrees on your passenger's side for quick and easy access to the rear of your vehicle. Includes locking, anti-rattle hitch pin.Features: Pivoting hitch extender lets you swing your Kuat bike rack 90 degrees or 120 degrees away from the rear of your vehicle Swings away from passenger's side for easy access to hatch or tailgate area Works with Kuat NV 2.0, NV Base 2.0, Sherpa 2.0 and Transfer bike racks for 2" hitches Toggle clamp lets you quickly release latch so arm can swing out Pull safety lever to swing arm out 90 degrees Pull safety lever again to release or to pivot arm out to 120 degrees Tool-free installation in your hitch with hand-tightening cam system Turn cam knob to tighten extender in hitch and help eliminate rattle in the connection Bike rack installs into Pivot and secures with bike rack's hitch pin Included locking hitch pin secures extender to vehicle Durable, black powder coated steel resists corrosion Specs: Application: 2" x 2" trailer hitch receivers Bike rack capacity: up to 4 bikes Weight capacity: 250 lbs Distance from center of hitch pin hole to: Rack pin hole: 12-3/16" Closest edge of carrier when folded: 5-3/16" Farthest edge of carrier when folded: 14-1/8" Farthest edge of carrier when unfolded: 42-9/16" Top of handle: 8-1/8" Shank rise: 3" Weight: 46 lbs Limited lifetime warranty Notes: The Pivot is only compatible with Kuat bike racks that have 2" shanks Not for use with hitch adapters, reducers, or extenders Using this hitch extender will reduce your hitch's overall capacity by 50 percent
... The rubber cores absorb road shock and help reduce chucking for a smooth ride. Greasable pivot offers easy lubrication.Features: Leaf spring suspension upgrade kit provides a smooth ride for your tandem-axle trailer Cushioned equalizers replace the cast equalizers that came standard on your trailer Rubber cores minimize chucking (back-and-forth movement) and help to absorb road shock Greasable pivot for easy lubrication Wet bolts and flange nuts included Sturdy steel construction with corrosion-resistant black powder coat finish Durable bronze bushings come pre-installed Quick, simple installation Center hangers (sold separately) suspend equalizers Springs attach to ends of equalizers with bolts and shackle straps (sold separately) Specs: Application: tandem-axle trailers with 1-3/4" wide double-eye leaf springs Axle capacity: 5,000 lbs - 8,000 lbs Center and top hole diameters (with bushings installed): 9/16" Dimensions: Distance between left and right bolt holes (center on center): 7-1/2" Distance between hanger bolt hole and side bolt hole (center on center): 3-3/4" Height of side bolt hole to hanger bolt hole: 4" 1-Year limited warranty for equalizers
Get more clearance and a smoother ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, standard-height spindle keeps your deck height the same. Fits any trailer frame width. Includes inner (L44649) and outer (L44649) bearings.The built-in hole accepts 2" x 2" steel tubing (not included) to add support to your trailer's frame. The tubing sits higher than a trailer axle, providing additional ground clearance.
This hitch extender converts your existing bike rack or hitch accessory into a swing-away rack. It rotates out 90 degrees to provide easy access to the rear of your vehicle. Fits 2" hitches and bike racks that hold up to 4 bikes. Lock included.You can even pair it with a hitch-mounted grill, allowing you to pivot the grill out away from the vehicle, while retaining full access to coolers and supplies while grilling. Before mounting your accessory, be sure it is a compatible hitch accessory.
Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers.Features: Easy to install: Bolt on mounting Can be mounted in a variety of ways on various sizes of trailer tongues Smooth operating Heavy-duty tongue jacks reduce physical effort required to maneuver loaded trailers into hitching position or removing the trailer from a vehicle Made from heavy-gauge steel for strength and durability The enclosed outer tube retards sand and dirt from contacting the miter gears and heavy-duty Acme screw Has maximum manueverability because of the offset swivel caster assembly Ergonomic hand grip with textured surface Made in the USA Specs: Capacity: 1,500 lbs Lift: 12" Fits square tongues up to 3" x 5" All mounting hardware included 2-1/2" Diameter mounting hole in swivel bracket Fits most other brands of mounting hardware Zinc plated TUFFPLATE finish for longer life 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
... This 2,000 lb swivel jack uses a drill adapter so the lift happens without the handle. It pivots up for clearance, and the SnapPad stays planted on soft ground.This one uses steel construction with an e-coat and glossy black powder coat on the outer tube and white zinc plating on the inner tube. The finish holds up through repeated raising and lowering, so the jack stays functional instead of locking up when you need it.
... This swivel bolt jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. It pivots up for clearance, and hitching doesn't drag on.This jack uses steel construction with an e-coat and glossy black powder coat on the outer tube, plus white zinc plating on the inner tube. It keeps raising and lowering through the season instead of turning into a seized-up replacement project.
Replaces the pivot pin for your Thule Hullavator or Hullavator Pro kayak carrier. Includes 1 pivot pin.Features: Replaces the pivot pin for your Thule Hullavator or Hullavator Pro kayak carrier Includes 1 pivot pin. Fits: Thule Hullavator: TH897XT Thule Hullavator Pro: TH898
When you're done cranking a manual jack or your trailer needs hydraulic lift added to the setup, this bolt-on kit gets you there. It mounts to the frame, ties into your pump, and comes with the hoses and fittings you need.Works With External Pumps: Designed to connect to the pump you already use for other trailer functions. 7,000-lb Capacity for Work Trailers: Built for A-frame equipment, utility, and lighter commercial trailers that lift often. Durable Round-Tube Construction: Round-tube design handles repeated lifting and steady use over time. Easy Bolt-On Install: Mounts to the frame without welding, giving you hydraulic lift without a full fabrication job.
A failing jack slows everything down. When a leg starts leaking or won't hold a load, it's time for a new one. Weld this replacement on, tie it into your pump, and the trailer is back to working the way you need it to.Heavy-Duty Strength: 8,000-lb capacity handles equipment, livestock, and commercial trailer loads. Square-Tube Stability: Welded structure stands up to repeated lifting on demanding trailers. Permanent Weld-On Mount: Attaches solidly to the frame for long-term use without bolt patterns or adapters.
When your manual jack wears you out or your old hydraulic leg won't keep up, this bolt-on replacement gets you back on track quick. Tie it into your existing pump and let your hydraulic system lift the load instead of your shoulders.Works With Your Existing Setup: Bolts on and ties into the hydraulic pump you already have for dependable lifting. 7,000-lb Capacity for Work Trailers: Built for A-frame equipment, utility, and lighter commercial trailers that lift often. Durable Round-Tube Construction: Round-tube body holds up to repeated lifting on trailers that see regular use. Easy Bolt-On Install: Mounts to the frame without welding, saving you time and avoiding a trip to a fabricator.
Powder coated, carbon steel receiver tube bolts onto your cab and chassis truck's hitch plate to give you a 2-1/2" hitch for towing or mounting accessories. Fits standard pintle hook mounting hole spacing.Features: Receiver tube bolts onto the hitch plate on your cab and chassis truck to add towing capabilities Fits standard pintle hook mounting hole spacing Heavy-duty carbon steel construction Black powder coat finish resists corrosion Specs: Receiver opening: 2-1/2" x 2-1/2" Gross towing weight: 20,000 lbs Maximum tongue weight: 2,000 lbs Hitch pin hole diameter 5/8" Mounting hole spacing: Vertical: 5-1/2" apart on center Horizontal: 3-3/8" apart on center Length from center of pin hole to collared end: 2-1/2" Length from center of pin hole to mounting plate end: 4" Tube thickness: 1/4" Collar thickness: 1/2" Mounting plate dimensions: 6" tall x 5" wide x 1/2" thick Overall length: 7"
Electric jack has a drop leg for 5-1/2" of lift on top of the 18" of screw travel. Large footplate minimizes sinking. Jack can be welded or bolted onto any A-frame trailer.Features: Tongue jack positions quickly and easily 12V Motor powers jack, eliminating need for hand cranking Built-in, water-resistant toggle switch for easy operation Integrated circuit breaker prevents motor damage All-steel gears are strong and durable Drop leg provides an extra 5-1/2" of lift for added clearance Dual side lights make it simple to set up your camper at night Emergency, ratchet-style crank socket 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Grease access hole on the lower stem assembly allows access to grease the threaded rod which leads to a longer jack life Easy bolt-on or weld-on installation for A-frame trailers Hardware included Mounting holes fit 2" or 2-1/4" spacing Round footplate included Die-cast aluminum cap resists corrosion Sturdy steel construction with black powder coat finish Specs: Bracket height: 9-1/4" Retracted with drop leg retracted 27-1/4" Extended with drop leg retracted 32-3/4 Extended with drop leg extended Total lift: 23-1/2" Screw travel: 18" Drop leg travel: 5-1/2" Lift capacity: 3,500 lbs Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 6" Distance between mounting holes center to center: 3" 5-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric jack has a drop leg for 4-1/2" of lift on top of the 18" of screw travel. Large footplate minimizes sinking. Jack can be welded or bolted onto any A-frame trailer. Extends 6" in 29.8 seconds with 1,000 lbs of tongue weight.Features: Tongue jack positions quickly and easily with integrated drop leg 12V Motor powers jack, eliminating need for hand cranking Built-in toggle switch for easy operation Integrated circuit breaker prevents motor damage All-steel gears are strong and durable Large front light makes it simple to set up your camper at night LEDs last longer and use less energy than incandescent bulbs Lamp is positioned so that it directs light downward to better focus on ground Emergency, ratchet-style crank socket 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Zerk fitting on the lower stem assembly allows access to grease the threaded rod which leads to a longer jack life Easy bolt-on or weld-on installation for A-frame trailers Hardware not included Mounting holes fit 2-1/4" spacing Extra-large footplate provides excellent stability Die-cast aluminum cap resists corrosion Sturdy steel construction with black powder coat finish Specs: Bracket height: 9-1/2" Retracted with footplate retracted 27-1/2" Extended with footplate retracted 32" Extended with footplate extended Total lift: 22-1/2" Screw travel: 18" Drop leg travel: 4-1/2" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 29.8 seconds Retracts 6" in 27.6 seconds Lift capacity: 4,000 lbs Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 6" 5-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
2" x 2" Receiver tube is designed for fabricating a custom hitch when a receiver isn't available. Weld-on installation. Tube is 12" long. Raw steel construction is durable.Features: Receiver tube is ideal for fabricating a custom hitch when a receiver tube isn't already available Weld-on installation Durable steel construction Unpainted finish Made in the USA Specs: Receiver size: 2" x 2" Overall length: 12" Length from center of pin hole to collared end: 2-1/2" Length from center of pin hole to non-collared end: 9-1/2" Tube thickness: 7/16" Collar thickness: 3/4" Gross towing weight: 16,000 lbs Pin hole diameter: 5/8"
Filters
