Need a complete lighting setup for your trailer? This kit includes everything required for trailers under 80" wide, making it easy to get fully equipped and compliant. ... Highlights Complete Trailer Lighting Setup: Kit includes tail lights, side marker lights, harness, and license bracket. DOT Lighting Coverage: Includes required lighting and reflectors for DOT compliance on trailers.
Connect your towed car's lighting system to your RV's to get the brake lights and turn signals required for towing. Designed for use with vehicles that have separate brake and turn signals. 4-Pole flat loop and wiring converter included.However, you will need to replace the 4-way vehicle-side connector with one that is capable of carrying the separate signals. The diagram below shows the installation of the 6-diode tail light wiring kit on a towed vehicle (or dinghy) that has separate turn signals (typically amber) and red brake lights. This kit will most often be used with a motor home that operates off of a 2-wire system wherein the brake lights do the flashing for the turn signals.
... They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex LED tail lights.If your motorhome has a separate lighting system, add a tail light wiring converter (RM-732 - sold separately) to keep your setup functioning properly. Wiring Diagram for Roadmaster Smart Diode Kit
Plug-and-play custom harness gets turn and brake signals on your towed car with no hardwiring or splicing, and no effect on your warranty. The built-in diodes protect your car from electrical feedback.A wiring converter (118158 - sold separately) and 2 additional diodes will be needed to retain separate turn and brake signals. (See below.) Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.Powered by Your Battery This converter won't overload or cause damage to your system because it pulls power straight from your vehicle's battery. So you can be sure that your trailer lights will activate no matter what type of bulbs your vehicle has - or your trailer, for that matter. Converter Wiring Configuration Wire Color Wire Function Green Right turn Brown Tail lights Black Battery power Red Brake White Ground Yellow Left turn Powered Tail Light Converter Installation This kit comes with all the wiring you'll need to convert your vehicle's lighting system to match your trailer's.
This wiring kit carries brake and turn signals from your motorhome to your towed car while you're flat towing. Diodes protect your car from damage from electrical feedback."Don't be intimidated by diodes: if you can strip and crimp wire, this installation will be no problem." Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way adapter cable and 6-way car-side socket."Don't be intimidated by diodes: if you can strip and crimp wire, this installation will be no problem." Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
Waterproof trailer lightkit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Waterproof housing and lens unit is submersible Great for marine trailer applications LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Universal mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL57RB Passenger side: STL56RB Light dimensions: 6-1/16" wide x 3-5/8" tall x 2-1/4" deep Number of diodes: Driver's side: 23 Passenger's side: 18 Power draw at 12.8 volts: Stop and turn lights: 0.268 amps Side marker lights: 0.059 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex incandescent tail lights.If your motorhome has a separate lighting system, add a tail light wiring converter (RM-732 - sold separately) to keep your setup functioning properly. Wiring Diagram for Roadmaster Smart Diode Kit
... They are really well-made and reliable, plus pretty easy to install. This kit is for variable voltage/multiplex LED tail lights.Other drivers will see that you're slowing down, but not that you're making a turn. With a brake light relay, you can signal both and travel safely. Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
This incandescent trailer lightkit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.Features: Incandescent trailer lightkit comes with everything needed to properly light a trailer over 80" wide Includes 2 tail lights, 2 amber clearance lights, 2 reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware Sonically sealed, waterproof tail lights and clearance lights are submersible 2 Low-profile combination tail lights (ST16RB and ST17RB) Provide stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex functions Driver's-side light includes license illuminator 2 Amber clearance lights (MC91AB) Self-grounding chrome bases Gaskets for weathertight seal 2 Amber reflectors (RE11AB) meet FMVSS "A" for reflex when properly applied Durable polycarbonate housing on all lights Compatible with 12V DC systems Simple installation with included mounting bracket (LP5SB) and stainless steel mounting hardware Tail lights stud mount to trailer Clearance lights surface mount to trailer Reflectors screw-mount to trailer or attach with adhesive backing 25' Wiring harness with 4-pole connector DOT approved PC rated Specs: Application: trailers over 80" wide Tail light dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Distance between mounting holes (center on center): 2" Clearance light dimensions: 2-7/8" long x 1-1/2" wide x 1" thick Reflector dimensions: 4-7/16" long x 1-15/16" wide Distance between mounting holes (center on center): 3-15/16" Power draw at 12V: Tail lights: Stop/turn: 2.3 amps Tail: 0.9 amps Clearance lights: 0.2 amps Limited 3-year warranty Note: Over 80" Federal Regulations require additional clearance lights (like MC94RB, sold separately) Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Waterproof trailer lightkit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Sealed, waterproof construction is submersible Durable surface-mount diode (SMD) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Stud mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL39RB Passenger side: STL38RB Light dimensions: 5-1/16" long x 4-9/16" tall x 2-5/8" deep Light face: 4-9/16" x 4-9/16" Distance between mounting studs (center on center): 2" Diodes: Driver's side: 10 Passenger's side: 7 Power draw at 12.8 volts: Stop and turn lights: 0.259 amps Side marker lights: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Get a head-start on wiring your towed car before you even get the installation started. This kit comes with butt connectors pre-installed and ready to splice into your wiring. Integrated block diodes protect your vehicle from electrical feedback.If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit. Without a relay, your car's brake signal will override the turn signal sent by the RV when you are slowing down to make a turn, creating a potentially dangerous situation.
... They are really well-made and reliable, plus pretty easy to install. This kit is for variable voltage/multiplex incandescent tail lights.Other drivers will see that you're slowing down, but not that you're making a turn. With a brake light relay, you can signal both and travel safely. Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
... They mount inside your vehicle's tail light housing, with the wiring out of sight.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's tail light housing Requires drilling Includes wiring, 2 incandescent lights, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA 1-Year warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
4-3/4" x 4-1/2" Square. Incandescent trailer lightkit provides all legal lighting and reflectors for trailers under 80". Includes combination tail lights and side markers. Stud mount with included hardware. 20' Harness. ... Features: Trailer lightkit provides all legal lighting and reflectors for trailers under 80" wide 2 Square combination tail lights provide 6 functions Stop, tail, turn, side marker, side reflex, and rear reflex Built-in license plate light on driver's-side light illuminates license plate 2 Rectangular marker lights are included to provide rear clearance light function Built-in reflex reflector removes the need for a separate reflector Incandescent bulb can be easily replaced Compatible with 12V DC systems Mounts on surface of trailer with included studs Includes license plate bracket for mounting driver's side light 20' Wiring harness for making connections DOT compliant PC rated Made in the USA Specs: Tail lights: Dimensions: 4-3/4" long x 4-1/2" tall x 2-13/16" deep Distance between mounting studs (center on center): 2" Power draw at 12V: 2.2 amps Bulb type: 1157 and 168 Clearance lights: Dimensions: 2-3/4" long x 2-1/8" tall x 1" deep Power draw at 12V: 0.25 amps Bulb type: 194 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Wesbar # 7504 Optronics # TL27BK PC-Rated Lights A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Mounts Fast: Strong magnetic bases stick securely to any trailer or towed vehicle. All Signal Functions: Stop, turn, and tail lights provide everything you need for towing. Great for Temporary Use: Ideal for flat towing or when trailer lights aren't working.
... They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex LED tail lights.If your motorhome has a separate lighting system, add a tail light wiring converter (RM-732 - sold separately) to keep your setup functioning properly. Wiring Diagram for Roadmaster Smart Diode Kit
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Powered by Your Battery This converter won't overload or cause damage to your system because it pulls power straight from your vehicle's battery. So you can be sure that your trailer lights will activate no matter what type of bulbs your vehicle has - or your trailer, for that matter. Converter Wiring Configuration Wire Color Wire Function Green Right turn Brown Tail lights Black Battery power Red Brake White Ground Yellow Left turn Powered Tail Light Converter Installation This kit comes with all the wiring you'll need to convert your vehicle's lighting system to match your trailer's.
These bright little lights get turn and brake signals on your towed car without splicing into its wiring. They install right into the tail light housing, with the wiring out of sight. ... Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Fits easily in tail light housing - requires only a 9/16" hole Requires drilling Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 red LEDs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA Specs: Wiring harness length: 26' Brown and green wire length: 8' 16 Gauge Light output per bulb: 144 Lumens 1-Year warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
... They are really well-made and reliable, plus pretty easy to install. This kit is for variable voltage/multiplex LED tail lights.Other drivers will see that you're slowing down, but not that you're making a turn. With a brake light relay, you can signal both and travel safely. Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
... They mount inside your vehicle's tail light housing, with the wiring out of sight.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's tail light housing Requires a 1" diameter hole drilled into the tail light housing Includes 2 wiring harnesses, 2 incandescent lights, 2 sockets, and installation hardware Made in the USA Specs: Overall measurement of bulb: 2-1/4" Length of bulb from flange to top of bulb: 2" Length past mounting surface: 1-7/8" 4-Way flat harness: 30' long RV harness: 6' long Hole required for sockets: 1" diameter Limited lifetime warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
These bright LEDs stick onto the back of your towed car and display turn and brake signals without tapping into the electrical system - which means no permanent modification to your car! Great for cars that won't work with traditional diodes.Features: LED light strips adhere to the rear of your car and display brake and turn signals No modification to your vehicle No risk of damage from electrical feedback Great for cars that are not compatible with traditional wiring diodes IP68 rating protects LED lights from moisture and dust Color-coded Y wiring harness reaches both sides of the car for easy installation Kit includes everything you need to wire your vehicle's tail lights for flat towing (2) 10" Long LED strips with 3M adhesive 2 Plug-and-play flip latch wiring connectors Wiring harness Zip ties and cable tie mount pads LED output: 152 lumens Made in the USA Limited lifetime warranty
This wiring kit carries brake and turn signals from your motorhome to your towed car while you're flat towing. Diodes protect your car from damage from electrical feedback. ... Features: Carries turn and brake signals from RV to towed vehicle while flat towing Prevents feedback that can damage your vehicle's electrical components with diodes Protects diodes from the elements with heat-sealed casing Includes: 4 Diodes 4-Wire harness with 4-way flat connectors 12 Spade connectors 4 Quick-splice wire connectors 6 Zip ties 1 Ring terminal Made in the USA Specs: Wiring harness length: 26' Wire gauge: 16 Max voltage: 24 volts 1-Year warranty Note: This kit wires your towed car as a combined lighting system, meaning that the brake and turn signals travel along the same wire. Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
Filters
