Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.Features: Landing gear set lets you raise and lower your trailer Ideal for standard agricultural, construction, and industrial trailer applications 2 Speeds make cranking faster and easier Low gear offers full lifting power at a ratio of 1" every 34-1/2 turns High gear provides ultimate speed with 1" for every 4-1/2 turns Traditional gearbox requires you to reposition crank to switch gears Drop legs with spring return increase overall extension for maximum adjustability Plunger pins positioned to the side Footplates minimize sinking in soft ground Landing gear welds onto trailer frame Sidewind handle and connecting rod included Specs: Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 50,000 lbs 25,000 lbs per jack Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Features: Perfect for raising, leveling, and supporting your 5th-wheel trailer or RV Direct-drive motor reduces strain on your jack and allows landing gear to lift with ease No clutch that could slip Single-speed motor won't trip circuits or cause problems with coach's electrical systems IP -rated switch will not spark, so it can be mounted safely in bottle-gas area Drop legs minimize jacking time and help to level the trailer on uneven ground Legs adjust in 1" increments Cage pins included to release drop legs Upgrade to spring-loaded pull pins (LG-119113 - sold separately) for simpler drop leg release Hand crank included for manual operation Heavy-duty steel construction Gearbox is housed in a corrosion-resistant aluminum body Landing gear welds onto trailer frame Set includes 2 jacks, gearbox, motor, switch, footplates, cross shaft, hand crank, and hardware Made in the USA Specs: Leg length: 33-1/2" Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Combined weight capacity: 6,500 lbs 1-Year warranty Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs. Convenience is a hallmark of this landing gear from Stromberg Carlson.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Features: Perfect for raising, leveling, and supporting your 5th-wheel trailer or RV Electric-powered adjustment for easy operation Direct drive reduces strain on your jack and allows landing gear to lift with ease No clutch that could slip Single-speed motor won't trip circuits or cause problems with coach's electrical systems IP -rated switch will not spark, so it can be mounted safely in bottle-gas area Drop legs minimize jacking time and help to level the trailer on uneven ground Legs adjust in 1" increments Cage pins included to release drop legs Upgrade to spring-loaded pull pins (LG-119113 - sold separately) for simpler drop leg release Hand crank included for manual operation Heavy-duty steel construction Gearbox is housed in a corrosion-resistant aluminum body Landing gear welds onto trailer frame Set includes 2 jacks, gearbox, motor, switch, footplates, cross shaft, hand crank, and hardware Made in the USA Specs: Leg length: 29-1/2" Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Rate of travel: 5-1/2" per minute Combined weight capacity: 6,500 lbs Cross shaft length: 41" - 71" Footplate dimensions: 8" long x 5" wide x 2" tall Outer tube width: 2-1/2" 1-Year warranty Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs. Stromberg Carlson's landing gear was designed with safety in mind.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs. Stromberg Carlson's landing gear was designed with safety in mind.
Replaces the bevel gears for 1 jack in your manual or electric HappiJac truck camper jack system (LC736514 or LC736515).Features: Replaces the bevel gears for 1 jack in your HappiJac truck camper jack system Fits LC736514 and LC736515 jacks and discontinued 4150, 4160, and 4220 Series jacks
Replaces the gears and shear pins for Curt heavy-duty, direct-weld square jack (28575).Features: Replaces the gears and shear pins for Curt heavy-duty, direct-weld square jack (28575) Fits: Model 28575 , Curt heavy-duty, direct-weld square jack
Perfect for motorhomes with Power Gear or Kwikee leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your Class A or C motorhome's Power Gear or Kwikee leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A and Class C motorhomes (see chart below) with Power Gear or Kwikee leveling systems and (4) 10" concave round jack feet Dimensions: 13-1/4" long x 13-1/4" wide x 2-3/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for Class A and C motorhomes with Power Gear leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground.Features: Heavy-duty rubber pads snap onto your Class or C motorhome's Power Gear leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A and Class C motorhomes (see chart below) with Power Gear leveling systems (3) 10" concave round jack feet Dimensions: 13-1/4" long x 13-1/4" wide x 2-3/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LG-142178 - sold separately). Retracted height is 32-3/4". ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (LC142178) sold separately. Retracted height is 32-3/4". ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.If you are replacing Lippert or Reese landing gear, you will need use the included weld-on hangers for installation. Do not use landing gear to lift your trailer or RV during tire changes or service work, because doing so will exceed the capacity of the landing gear.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).How to Determine the Support Capacity You Need in Your Landing Gear Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo. For example, a 14,000-lb trailer has a pin weight of about 3,500 lbs.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).How to Determine the Support Capacity You Need in Your Landing Gear Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo. For example, a 14,000-lb trailer has a pin weight of about 3,500 lbs.
Give your 5th-wheel trailer or camper some new legs! Upgraded motor works nearly twice as fast as the standard 80 RPM base model. Outer tubes are 29-1/2" long with 15-1/2" between weld stops. Total lift includes 16" of drop leg.As long as these measurements match the legs you're replacing, you should be able to swap out your current landing gear for this set, even it's from a different brand. How to Determine the Weight Capacity You Need in Landing Gear Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo.
Cross brace bars permanently attach to your fifth wheel's landing gear to reduce your trailer's movement while parked. After installation, the braces will extend and retract with your landing gear. ... Features: Cross braces permanently attach to your 5th wheel's landing gear to reduce your trailer's movement while parked Braces extend and retract with landing gear for easy setup and storage Tubes adjust by hand to maximize stability Pin flags lock tubes in position Black powder coat finish resists corrosion Easy, bolt-on installation with included hardware - no drilling required Specs: Application: square, electric landing gear legs Tube dimensions: Fully retracted: 54" long x 1" diameter Fully extended: 80" long x 1" diameter Weight: 22 lbs 1-Year limited warranty Note: This stabilizer will not work with round, hydraulic landing gear legs.
Replaces the gears and roll pins on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks.Features: Replacement gear kit works with etrailer and Ram square, direct-weld jacks that have a 10,000-lb lift capacity Designed for use with TJD-12000 Series jacks Kit includes 2 gears and 2 roll pins
Replaces the gears and roll pins on your etrailer or Ram square, direct-weld, sidewind jack with a 5,000-lb or 7,000-lb capacity. Designed for TJD-5000S and TJD-7000S Series jacks.Features: Replacement gears and roll pins work with etrailer and Ram square, direct-weld, sidewind jacks that have a 5,000-lb or 7,000-lb capacity Designed for use with Ram TJD-5000S and TJD-7000S Series jacks Kit includes 2 gears and 2 roll pins
Replaces the gears and roll pins on your etrailer or Ram sidewind trailer jack with a 2,000-lb or 5,000-lb capacity. Designed for TJA-2000S Series and TJA-5000S Series jacks.Features: Replacement gear kit works with etrailer and Ram sidewind jacks that have a 2,000-lb or 5,000-lb lift capacity Designed for use with TJA-2000S Series and TJA-5000S Series jacks Kit includes 2 gears and 2 roll pins 15 Teeth per gear
Replaces the connecting rod and allows you to operate the lead leg and follow leg of your etrailer or Ram 50,000-lb landing gear set (STLG-5003321, STLG-5003312, TJD2SPDSET-50100) at the same time.Features: Replaces the connecting rod on your etrailer or Ram 50,000-lb, 2-speed landing gearjacks (STLG-5003321, STLG-5003312, TJD2SPDSET-50100)
Replaces 1 return spring for your Power Gear external spring RV leveling jacks. Works for both 9,000-lb (500082, 500082H, 500082HR, 500272, or 500759) and 12,000-lb (501315 or 500800) Power Gearjacks. ... Features: Replaces 1 return spring for your Power Gear RV leveling jacks Works with: 9,000-lb Power Gear leveling jacks: 500082, 500082H, 500082HR, 500272, and 500759 12,000-lb Power Gear leveling jacks: 501315 and 500800 Includes all of the required installation hardware Specs: Length: Overall: 16-3/4" Spring only: 14-1/2" Diameter: 2-1/2" Fits: 9,000-lb Power Gear leveling jacks: 500082, 500082H, 500082HR, 500272, and 500759 12,000-lb Power Gear leveling jacks: 501315 and 500800
Filters
