Replacement adjuster plug fits many Dexter and Demco (Dico) electric and hydraulic trailer brake assemblies.Features: Adjuster plug fits many Dexter and Demco (Dico) electric and hydraulic trailer brake assemblies Dexter 7" x 1-1/4", 10" x 1-1/2", 10" x 2-1/4", and 12" x 2" electric and hydraulic brakes Demco (Dico) 10" x 2-1/4" and 12" x 2" hydraulic brakes Specs: Overall dimensions: 0.993" long x 0.336" wide x 0.273" tall Quantity: 1 plug
This shackle strap helps you to mount a leaf spring, bracket or accessory on your trailer. It is designed to accept a 9/16" diameter shackle bolt or U-bolt. Made of corrosion-resistant galvanized steel.Features: Heavy-duty shackle link helps to secure a leaf spring or bracket on your trailer 1/4" Galvanized steel construction is sturdy and resists corrosion Made in USA Specs: Length: 2-3/4" from center of 1 hole to center of the other hole Overall dimensions: 4-1/4" long x 1-1/4" wide x 1/4" tall Quantity: 1 shackle strap Diameter of bolt holes (each): 9/16" Spacing of mounting holes: 2-3/4" apart on center Shackle links or straps are used to attach brackets and accessories, or to secure leaf springs to help make your trailer's suspension less rigid.
... Integrated voltage regulation. Recessed mount with included grommet and AMP-style plug.These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
... Integrated voltage regulation. Recessed mount with included grommet and AMP-style plug.These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
... Tongue-and-groove lens seal. Recessed mount with included grommet and 3-wire plug.These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
... Recessed mount with included grommet. Hardwires with included 2-wire plug. (1) 1156 bulb.Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
... Tongue-and-groove lens. Recessed mount with included grommet and 2-wire plug.Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
Replaces the 4-way round, female plug mounts to the front of your towed car's base plate for easy hookup with your Blue Ox coiled electrical cable.Features: Replaces car-end 4-way round plug from your Blue Ox coiled electrical cord (BX88254 or BX8861) Mounts to the front of your towed vehicle's base plate for easy hookup Spring-loaded lid keeps dust and moisture out of the connector when it is not in use 2-Hole mounting style Durable metal construction Made in the USA Specs: Distance between mounting holes: 1-3/4" center to center Mounting hole diameter: 1/4" Quantity: (1) 4-way plug with bracket Fits: Model number BX88254 or BX8861 , Blue Ox coiled electrical cable
6-1/2" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately). The weathertight connector blocks out moistureYou can hardwire it to your trailer with a pigtail harness (A45PMB - sold separately) or use an adapter (AL45PWTB - sold separately) to plug into a 3-plug pigtail. Pick up a right-angle pigtail (A47PB - sold separately) or a straight pigtail (A45PB - sold separately) as well if you need one.
4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and has a weathertight connector.It needs a particular adapter (AL45PWTB - sold separately) to plug into a 3-plug pigtail and connect to your vehicle or trailer. Pick up a right-angle pigtail (A47PB - sold separately) or a straight pigtail (A45PB - sold separately) if you don't have one already.
This 4-way round, female plug mounts to the front of your towed car's base plate for easy hookup with your Blue Ox coiled electrical cable.Features: Replaces car-end 4-way round plug from your Blue Ox coiled electrical cord (BX88254 or BX8861) Mounts to the front of your towed vehicle's base plate for easy hookup Made in the USA Specs: Distance between mounting holes: 1-3/4" center to center Mounting hole diameter: 1/4" Quantity: (1) 4-way plug with bracket
6-1/2" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and has a weathertight connector.It needs a particular adapter (AL45PWTB - sold separately) to plug into a 3-plug pigtail and connect to your vehicle or trailer. Pick up a right-angle pigtail (A47PB - sold separately) or a straight pigtail (A45PB - sold separately) if you don't have one already.
4-5/16" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately) and designed with a weathertight connector. Hardwires to your trailer with the included pigtail.It needs a particular adapter (AL45PWTB - sold separately) to plug into a 3-plug pigtail and connect to your vehicle or trailer. Pick up a right-angle pigtail (A47PB - sold separately) or a straight pigtail (A45PB - sold separately) if you don't have one already.
... Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. 7-way RV-style plug makes setup easy.Features: Electric jack lets you raise and lower your A-frame trailer Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location 2 Toggle switches on the front of the housing let you operate the jack On/off switch controls light Extend/retract switch controls up and down movement 7-way RV-style plug pulls power from your vehicle's trailer connector No need to manually wire for power 7-Way must have active 12 volt pin LED light illuminates at a downward angle to help you focus on your coupler Emergency crank (included) allows you to manually operate jack if needed Black powder coated outer tube Zinc-finished inner tube and footplate resist corrosion Simple, bolt-on installation Specs: Bracket height: Retracted: 9" Extended: 28-1/2" Total lift: 25-1/8" Screw travel: 19-1/2" Drop leg travel: 5-5/8" Clearance: 20-1/2" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Hole spacing on drop leg: 1-7/8" Footplate diameter: 5-1/2" Lift capacity: 3,500 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This socket plugs into T-connector to provide a 7-pole trailer connector in the truck bed for use with fifth wheels. Connector plugs into OEM wiring harness to allow for a 7-pole connector in the truck bed.Features: 7-Pole, sealed socket, RV-style trailer connector with T-connector Plugs into OEM harness - no splicing Provides quick and easy installation of RV socket in truck bed High-impact nylon construction Resists corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents intrusion of moisture when closed Has drain slot and angled design for drainage Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Application: Chevy, Dodge, GMC, Ford and Nissan trucks Current rating: 30 amps Volt rating: 12 volts Length: 7-1/2 feet Recommended hole cutout for connector in bed: 2-1/8" 1-Year limited warranty
4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts with the built-in flange and has a weathertight connector.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mount with built-in black flange Hardware not included Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions with flange: 5-1/2" diameter x 1-15/16" thick Light face: 4" diameter Distance between mounting holes (center on center): 4-1/4" Compatible with 12V DC systems Diodes: 10 Power draw at 12.8V: Stop/turn: 0.413 amps Tail: 0.026 amps Lifetime warranty on LEDs Weathertight Wiring Connection This trailer light has a weathertight plug that's designed to block out moisture.
... The red diode with clear lens is perfect for clearance or side marking and fits snug with the included grommet. Plug-and-play, 2-wire bullet connectors. Fully submersible - great for boat trailers! PC rated.Plug-and-Play: 2-wire design with 0.180" bullet connectors allows for quick installation. Waterproof for Boat Trailers: Sealed housing prevents water intrusion - ideal for boat and utility trailers.
Versatile 3/4" red LED works as a clearance, marker, or third brake light. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. 3-wire setup with bullet connectors for easy hookup. PC rated.Waterproof for Boat Trailers: Sealed housing prevents water intrusion - ideal for boat and utility trailers. Quick, Secure Install: Pushes into a 3/4" hole with the included rubber grommet - no brackets needed. Plug-and-Play: 3-wire design with bullet connectors allows for simple installation.
Grease cap fits EZ Lube and Easy Grease trailer hubs with 2.72" inner diameter. Rubber plug is included.Features: Grease cap for EZ Lube and Easy Grease trailer hubs Includes rubber plug 22-Gauge, zinc-coated steel construction Drive-in installation Specs: Outer diameter: 2.72" Quantity: 1
Plug this fast 12V jack into your 7-way trailer connector for power and get quick, simple lifting. Rust-resistant, die-cast aluminum cap and steel gears make for a long-lasting jack. ... Features: Tongue jack positions quickly and easily 12V Motor powers jack, eliminating need for hand cranking Built-in, water-resistant toggle switch for easy operation Integrated circuit breaker prevents motor damage All-steel gears are strong and durable 7-Way RV-style plug pulls power from your vehicle's trailer connector Great for trailers without batteries No need to manually wire for power Dual side lights make it simple to set up your camper at night Emergency, ratchet-style crank socket included 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Zerk fitting on the lower stem assembly allows access to grease the threaded rod, which leads to a longer jack life Easy bolt-on or weld-on installation for A-frame trailers Hardware not included Mounting holes fit 2" or 2-1/4" spacing Round, removable footplate included Die-cast aluminum cap resists corrosion Sturdy steel construction with black powder coat finish Specs: Bracket height: 9-1/2" Retracted 27-1/2" Extended Lift: 18" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 25.3 seconds Retracts 6" in 23.7 seconds Lift capacity: 3,500 lbs Outer tube diameter: 2" Inner tube diameter: 1-3/4" Footplate diameter: 6" 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
... Clear lens is perfect for clearance or side marking and fits snug in a recessed mount with the included grommet. Plug-and-play, 2-wire design. Sealed and submersible - great for boat trailers! PC rated.Highlights Small but Bright: 3/4" round LED works as a clearance or side marker light - adds visibility without taking up space. Quick, Secure Install: Pushes into a 3/4" hole with the included rubber grommet - no brackets or extra hardware needed. Plug-and-Play: 2-wire design with 0.180" bullet connectors allows for quick installation.
... The amber diode with clear lens is perfect for clearance or side marking and fits snug with the included grommet. Plug-and-play, 2-wire bullet connectors. Fully submersible - great for boat trailers! PC rated.Plug-and-Play: 2-wire design with 0.180" bullet connectors allows for quick installation. Waterproof for Boat Trailers: Sealed housing prevents water intrusion - ideal for boat and utility trailers.
Versatile 3/4" amber LED works as a clearance, marker, or third brake light. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. 3-wire setup with bullet connectors for easy hookup. PC rated.Waterproof for Boat Trailers: Sealed housing prevents water intrusion - ideal for boat and utility trailers. Quick, Secure Install: Pushes into a 3/4" hole with the included rubber grommet - no brackets needed. Plug-and-Play: 3-wire design with bullet connectors allows for simple installation.
... Surface mount to trailer - hardware not included. 2-Wire design with weathertight plug.Features: Incandescent trailer light functions as a clearance or side marker light when properly mounted Built-in reflex reflector removes the need for a separate reflector Incandescent bulbs can be easily replaced Durable ABS housing Red lens over incandescent bulbs Compatible with 12V DC system Surface mount to trailer - hardware not included 2-Wire design with weathertight plug DOT compliant P2 rated Specs: Dimensions: 5-3/16" long x 2" tall x 1" thick Distance between mounting holes (center on center): 4-13/16" Bulb type: incandescent Power draw at 12.8V: 0.422 amps 3-Year warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Filters
