Replaces or adds a rear marker light camera and monitor for your Furrion Vision S RV backup camera system.Features: Replaces the rear marker light camera and monitor on your Furrion Vision S RV backup camera system Works with Furrion Vision S Backup Camera System (FOS43TASF, FOS05TASF, or FCN48TASF
Waterproof cameras let you keep an eye on your blind spots whether you're changing lanes on a busy highway or backing up into a tight campsite space. Motion sensors automatically power the monitor to alert you of prowling animals or trespassers. has a 120-degree viewing angle to help you navigate while backing up. Depending on your camera setup, this system allows you to add 1 additional camera (FCN48TASF - sold separately) for a total of 4
Replaces the antenna for your Furrion Vision 1, 2, or S wireless RV camera system.Features: Replaces the antenna for your Furrion Vision 1, 2, or S wireless camera system Works with FCN48TASF, FCE48TASL-05, FCE48TASL-07, FOS05TASF, FOS07TASF, or FOS43TASF 4-1/4" Long
In most states a tow dolly like the Demco Kar Kaddy SS Tow Dolly with Disc Brakes part #DM9713045 does not need to be licensed and tagged, but many require that the tow dolly be titled and registered. The towed vehicle however must be licensed as its…
If you wanted to use the Gorilla-Lift Utility Trailer Tailgate Lift Assist part #GL1 on your utility trailer with tall sides you would need to have a rail that is 12" to 24" from trailer floor. It does not look like there is one from the…
From what I could find out, the Lippert 122093 will use the #25580 inner bearing and the #LM67048 outer bearing. This means that the Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 6 on 5-1/2 #8-201-5UC3-EZ will be a perfect fit.…
Hello Michael. In order to add a 7-way trailer connector to a 2022 Nissan Pathfinder you'll need to start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #TK58VR. Then from there you want to add the Universal Installation…
The weld stops on the Lippert Electric Landing Gear Set #LC333964 referenced in your question are not designed to be moved, but I can give you a couple dimensions to see if they will match up to the existing brackets on your trailer. The weld stops…
Technically any landing gear will fit your 5th wheel, but the real key is to find one with matching weld stops so that you don't have to cut the brackets off and weld on new ones. The Stromberg Carlson Electric Landing Gear Set #LG-4 has a…
For your 2010 Open Range 5th-Wheel Trailer, I recommend looking at the Stromberg Carlson Electric Landing Gear Set #LG-4. Each leg on this set is 33-1/2 inches tall and provides up to 19-7/8 inches of travel. It has a combined weight capacity of…
Absolutely, and thank you for your measurements. For your 2010 Keystone Outback 285FL, the closest we have is the Stromberg Carlson Electric Landing Gear Set #LG-4. The distance between the weld stops on #LG-4 is 19-1/2" which is 1/8"…
I have two refrigerators that are close to the size you're wanting. The Everchill Refrigerator #324-000119 has a width of 23-1/2 inches a depth of 24-3/4 inches and a height of 59-5/8 inches. A Furrion option is 24-1/4 inches wide, 25-3/4 inches…
The Trailair Rota-Flexes like the part #LC328329 that you referenced do not have stated pin weight capacities so as long as the trailer's overall weight is less than 21k it would be safe to use. Typically pin weight is 20 percent of the total…
When adjusting the height of a pin box such as #LC1191191 it is important to support the pin box when removing the bolts. I recommend 2 or 3 buddies to give you a hand and make sure no one is beneath the pin box while raising or lowering it. With the…
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Filter Results
