... Installs easily with the included backingplates and hardware. WLL is 2,000 lbs per D-ring.Features: D-ring anchors provide tie-down points in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 360-Degree swivel lets you rotate D-rings so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-rings from interfering as you roll cargo into and out of your trailer or truck bed Backingplates reinforce the surface of your trailer where the tie-downs attach Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backingplates attach directly under D-ring anchors and on the opposite side of the mounting surface 16 Nuts, 16 lock washers, and (16) 5/16" x 2-1/4" bolts included Specs: Maximum load (break strength): 6,000 lbs per D-ring Safe working load limit (WLL): 2,000 lbs per D-ring Anchor dimensions: Base diameter: 6-5/16" Recess: 7/8" D-ring thickness: 1/4" Backingplate dimensions: 6-1/2" long x 6-1/2" wide x 1/8" thick Quantity: 4 D-rings Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
... The recessed design allows you to roll cargo over the ring. Includes backingplate and mounting hardware.Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords D-ring 90-degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Included backingplate provides greater support than mounting the anchor directly to wood Zinc-plated steel construction resists corrosion and retains its strength through repeated use Simple, bolt-on installation with mounting hardware Includes 4 Nuts, 4 lock washers, and (4) 3/8" x 2-1/4" bolts Specs: Maximum load (break strength): 5,000 lbs Working load limit: 1,600 lbs Anchor: Bezel dimensions: 4-1/2" wide x 4-7/8" tall Ring diameter: 1/2" Inner ring diameter: 1-3/8" Recess dimensions: 3-3/8" wide x 3/4" deep Bolt hole dimensions: 3/8" wide x 3/8" tall Bolt size: 3/8" diameter x 2-1/4" long Backingplate dimensions: 6-1/2" wide x 6-1/2" tall 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy D-ring serves as an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for corrosion resistance. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 360-Degree swivel lets you rotate D-ring so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Backingplate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backingplate attaches directly under D-ring anchor and on the opposite side of the mounting surface 4 Nuts, 4 lock washers, and (4) 5/16" x 2-1/4" bolts included Specs: Maximum load (break strength): 6,000 lbs Safe working load limit (WLL): 2,000 lbs Anchor: Base diameter: 6-5/16" Recess: 7/8" D-ring thickness: 1/4" Backingplate dimensions: 6-1/2" long x 6-1/2" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
... Built-in bolt allows for easy attachment to your trailer. Backingplate included.Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords D-ring rotates 180 degrees so you can attach straps from multiple angles Included backingplate and washer provides mounting point for the bolt Zinc-plated steel ring and black powder coated plate resist corrosion and retain strength through repeated use Simple, bolt-on installation (mounting hardware not included) Some drilling required Made in the USA Specs: Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 lbs 1-Year limited warranty
... Installs easily with the included backingplate and hardware. WLL is 400 lbs.Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Backingplate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a 3" diameter hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backingplate attaches directly under D-ring anchor and on the opposite side of the mounting surface 3 Nuts, 3 lock washers, and (3) 1/4" x 2-1/4" bolts included Specs: Maximum load (break strength): 1,200 lbs Safe working load limit (WLL): 400 lbs Anchor: Base dimensions: 5" long x 3-9/16" wide Recess: 5/16" D-ring thickness: 1/4" Backingplate dimensions: 6-1/2" long x 6" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
... Installs easily with the included backingplate and hardware. WLL is 265 lbs.Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Surface-mount design doesn't require you to cut a hole in your trailer or truck bed Backingplate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Simple, bolt-on installation on flat surface Backingplate attaches directly under D-ring anchor and on the opposite side of the mounting surface 2 Nuts, 2 lock washers, and (2) 1/4" x 2-1/4" bolts included Specs: Maximum load (break strength): 800 lbs Safe working load limit (WLL): 265 lbs Anchor: Base diameter: 4" D-ring thickness: 1/4" Backingplate dimensions: 6-1/2" long x 6" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
... Installs easily with the included backingplate and hardware. WLL is 265 lbs.Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 2 Mounting options Surface mounting doesn't require you to cut a hole in your trailer or truck bed Recessed mounting helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Removable plastic gasket helps to create a seal against dirt and water when D-ring is surface mounted Also reduces corrosion and oxidation Backingplate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface For recessed mount, cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backingplate attaches directly under D-ring anchor and on the opposite side of the mounting surface 2 Nuts, 2 lock washers, and (2) 1/4" x 2-1/4" bolts included Specs: Maximum load (break strength): 800 lbs Safe working load limit (WLL): 265 lbs Anchor: Base diameter: 4" Recess: 1/4" D-ring thickness: 1/4" Backingplate dimensions: 6-1/2" long x 6" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Zinc-plated steel backingplate reinforces a Brophy recessed D-ring tie-down anchor (RR05). Plate bolts on underneath the floor of your trailer to reinforce the area under the anchor for maximum support. ... Features: Backingplate reinforces the area where a Brophy recessed D-ring tie-down anchor (RR05) is mounted More secure installation means that the anchor is well supported Helps ensure that anchor will hold when tying down a heavy load Zinc-plated steel resists corrosion Simple, bolt-on installation Backingplate installs beneath trailer floor Mounting hardware not included Specs: Dimensions: 6-1/2" wide x 6-1/2" tall x 1/8" thick Center hole diameter: 3-5/16" Bolt hole diameter: 3/8" 1-Year limited warranty
Tie-down reinforcement plate for recessed swivel trailer tie-downs. The plate is is placed under the surface of the tie-down location to offer greater support than just the wood.
Backingplate lets you install your Brophy bolt-on D-ring tie-down anchor (DR01 - sold separately). Powder coated steel construction resists corrosion.Features: Backingplate provides mounting point for your Brophy D-ring tie-down anchor (DR01 - sold separately) D-ring bolts onto plate Black powder coated steel resists corrosion Made in the USA Specs: Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 lbs Quantity: 1 backingplate 1-Year limited warranty
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged, which allows straps to be attached from different angles Black powder coated steel is durable and rust resistant Made in the USA Specs: Safe working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 2" Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of the anchor 3-1/2" Wide 4-1/4" From the bottom of the mounting plate to the top of the pin hole Top plate dimensions: 3-1/2" long x 2" wide Pin diameter: 1/2" Quantity: 1 stake pocket tie-down 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy D-ring anchor bolts onto a backingplate (BP1D - sold separately) to create an attachment point for tie-down straps and bungee cords wherever you need cargo control. ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords Requires backingplate (BP1D - sold separately) for installation D-ring rotates 180 degrees so you can attach straps from multiple angles Zinc-plated steel construction resists corrosion and retains its strength through repeated use Built-in bolt for easy installation Made in the USA Specs: Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 lbs Ring diameter: 1/2" Bolt dimensions: 3" long x 5/8" diameter Thread: 5/8-11 1-Year limited warranty
This steel D-ring tie-down kit gives you a strong, secure anchor point for hauling cargo without getting in the way. The flush-mount design sits low to prevent interference, and each pack includes 2 rings with mounting hardware.Features: Steel D-ring tie-down kit provides a secure anchor point for hauling cargo Flush-mount design sits low so it does not interfere with your cargo 5,000-lb Rating supports heavy-duty tie-down applications Zinc-plated finish helps resist corrosion Stainless steel hardware and galvanized backer plates are included for installation 2 D-rings are included per pack Specs: Quantity: 2 D-rings Rating: 5,000 lbs Construction: Material: Steel Finish: Zinc plated Hardware: Stainless steel Backer plates: Galvanized
This steel backingplate for the E-track or D-ring in your enclosed trailer provides more support than just securing it with wood or metal screws. Bolt the plate to your E-track on the opposite side of the wall or under the floor.Features: Backingplate provides extra support for your E-track or D-ring (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plate compatible with E-tracks, D-rings, and single tie-down anchors Galvanized steel construction is strong and corrosion resistant Simple, bolt-on installation with included hardware Attach plate to E-track or D-ring on the opposite side of the wall or under the floor Made in the USA Specs: Quantity: 1 backingplate Dimensions: 6" long x 6" wide x 1/8" thick 4-Bolt mounting pattern: 4-1/2" x 4" Limited lifetime warranty Note: The included hardware lets you mount your E-track on surfaces up to 2" thick.
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for corrosion resistance.Features: Tie-down provides a solid point to secure your cargo with straps or bungee cords D-ring rotates 90-degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Zinc-plated steel construction resists corrosion and retains its strength through repeated use Simple, bolt-on installation Mounting hardware not included Optional backingplate provides greater support than if the anchor was mounted alone (sold separately - BP05) Specs: Maximum load (break strength): 5,000 lbs Working load limit: 1,600 lbs.
... No need to cut a mounting hole. Zinc-plated steel ring and mounting bracket resist corrosion.Features: Sturdy D-ring provides a solid attachment point for tie-down straps and bungee cords wherever you need cargo control Simple bolt-on installation Mounting bolts not included Surface-mount design No need to cut a hole in your trailer or truck bed D-ring rotates 180-degrees so you can attach straps from multiple angles Zinc-plated steel construction resists rust and corrosion Optional backingplate (BP12) provides additional strength when mounting to thin steel or wood Specs: Maximum load (break strength): 1,500 lbs Safe working load limit (WLL): 500 lbs Ring diameter: 1/4" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
These steel backingplates for (4) 8' E-tracks in your enclosed trailer provide more support than just securing it with using wood or metal screws. ... These backingplates provide more support for your E-track (sold separately) than only using wood or metal screws. Simply put, they allow the pulling force to be distributed over a greater area.
These steel backingplates for the 8' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. ... These backingplates provide more support for your E-track (sold separately) than only using wood or metal screws. Simply put, they allow the pulling force to be distributed over a greater area.
These steel backingplates for the 5' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. ... These backingplates provide more support for your E-track (sold separately) than only using wood or metal screws. Simply put, they allow the pulling force to be distributed over a greater area.
These steel backingplates for the 2' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. ... These backingplates provide more support for your E-track (sold separately) than only using wood or metal screws. Simply put, they allow the pulling force to be distributed over a greater area.
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Hardware not included Specs: Maximum load (break strength): 1,200 lbs Safe working load limit (WLL): 400 lbs Base dimensions: 5" long x 3-9/16" wide Recess: 5/16" D-ring thickness: 1/4" Fastener hole diameter: 5/16" 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged, which allows straps to be attached from different angles Black powder coated steel is durable and rust resistant Made in the USA Specs: Safe working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 1-3/4" high x 2" wide Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of the anchor 3-1/2" Wide 4-1/4" From the bottom of the mounting plate to the top of the pin hole Top plate dimensions: 3-1/2" long x 2" wide Pin diameter: 1/2" Quantity: 1 stake pocket tie-down 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged, which allows straps to be attached from different angles Zinc-coated steel offers excellent corrosion resistance Made in the USA Specs: Safe working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 2" Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of the anchor 3-1/2" Wide 4-1/4" From the bottom of the mounting plate to the top of the pin hole Top plate dimensions: 3-1/2" long x 2" wide Pin diameter: 1/2" Quantity: 1 stake pocket tie-down 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged, which allows straps to be attached from different angles Zinc-coated steel offers excellent corrosion resistance Made in the USA Specs: Safe working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 1-3/8" Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of the anchor 3-1/2" Wide 4-1/4" From the bottom of the mounting plate to the top of the pin hole Top plate dimensions: 3-1/2" long x 2" wide Pin diameter: 1/2" Quantity: 1 stake pocket tie-down 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Filters
