You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.Features: Custom-fit, retractable tonneau cover protects your cargo and your vehicle's bed from the elements Cover can be installed or completely removed by 1 person in approximately 10 minutes Requires only a wrench and screwdriver - no drilling Retractable design offers easy access to your bed Pinch grips underneath rear plate automatically retract cover when squeezed Tension spring allows cover to open smoothly Stored cover won't restrict rear window visibility Integrated pull strap lets you deploy cover quickly Closed cover secures truck bed when used in conjunction with locked tailgate Space-saving canister protects retracted cover from the elements to extend life of cover Compact, angled design allows for maximum useable cargo space in bed Drain tubes funnel water from canister out through hole in truck bed floor Low-profile cover sits inside truck bed rails for a flush look Aerodynamic style reduces wind drag and helps to improve gas mileage Black vinyl fabric bonded to rigid aluminum panels offers a seamless, stylish look Weather-resistant materials keep water and debris from entering the truck bed Foam seal installs under rails and canister at bulkhead Large seal at the rear of the bed closes the gap between the cover and tailgate Made in the USA Specs: Canister dimensions: 9-1/4" tall x 9-3/4" deep 2-Year limited warranty The Switchblade retractable hard tonneau cover provides you with security and weather protection for your truck bed, easy accessibility to your cargo, and the flexibility to haul large items that require full bed capacity whenever needed.
Avoid the hassle of traditional, snap-style tonneau covers, improve gas mileage and upgrade the look of your truck with a TruXport. The cover attaches on top of your truck bed side rails with clamps and rolls up to store conveniently behind the cab.Features: Economically priced alternative to traditional, snap-style covers Clamp-on installation in minutes Rails mount on top of truck bed side rails Dual latching mechanism with built-in, pre-set tension control Keeps the cover tight in any climate Sets the tension of the cover automatically when the rear header is snapped into place Lets you easily release the cover one latch at a time for easy access to your cargo Provides added security when used with locking tailgate Smooth appearance with no arched bows Cover sits approximately 1-1/2" above truck bed rails Aerodynamic design improves gas mileage by up to 10 percent Made in the USA Specs: Color: black 5-Year warranty Improve the look of your truck, avoid the hassle of traditional, snap-style tonneau covers and save money all in one with the TruXedo TruXport soft, roll-up cover.
Avoid the hassle of traditional, snap-style tonneau covers, improve gas mileage and upgrade the look of your truck with a TruXport. The cover attaches on top of your truck bed side rails with clamps and rolls up to store conveniently behind the cab.Features: Economically priced alternative to traditional, snap-style covers Clamp-on installation in minutes Rails mount on top of truck bed side rails Dual latching mechanism with built-in, pre-set tension control Keeps the cover tight in any climate Sets the tension of the cover automatically when the rear header is snapped into place Lets you easily release the cover one latch at a time for easy access to your cargo Provides added security when used with locking tailgate Smooth appearance with no arched bows Cover sits approximately 1-1/2" above truck bed rails Aerodynamic design improves gas mileage by up to 10 percent Made in the USA Specs: Color: black 5-Year warranty Improve the look of your truck, avoid the hassle of traditional, snap-style tonneau covers and save money all in one with the TruXedo TruXport soft, roll-up cover.
Get style and versatility with this heavy-duty, all-aluminum tonneau. Quad-fold cover sits inside your vehicle's bed rails and secures upright for unrestricted bed access. Tailgate opens and closes with cover up or down. ... Features: Custom-fit tonneau cover protects your cargo and your vehicle's bed from the elements Aerodynamic style reduces wind drag, improving gas mileage Quad-fold design allows for partial or full truck bed access in seconds without having to remove cover Prop rods let you secure folded cover in upright position so you can drive with truck bed completely open Integrated buckle system lets you secure the cover in the folded, flipped up, or closed position Low-profile cover sits inside your truck bed rails Compatible with stake-pocket-mounted accessories and raised side rails Automatically latching panels create a secure truck bed when tailgate is closed and locked Rear seal lets you open and close tailgate with cover open or closed Matte black rubber seals and built-in drainage system help to keep water out of bed 1/2" Thick, rustproof aluminum panels are sturdy and durable Premium density foam core adds strength Cover rated to hold up to 400 lbs of evenly distributed weight Matte black finish is resistant to scratches, scuffs, and UV rays Aircraft-grade, rustproof aluminum rails with black powder coat finish create base for tonneau Easy, no-drill installation Frame rails clamp to the inside of your truck bed side rails Included bolts secure front hinge rail to frame rails Compatible with BakBox2 (sold separately) Made in the USA 5-Year warranty
Replace the vent cover on your Elixir trailer roof vent (made after 1995) or your Ventline trailer roof vent (V2094 - made before 2008) with this equivalent part. ... Features: Replacement cover for 14-1/4" x 14-1/4" roof vents Cover measures: 15" x 15" Lightweight, polypropylene domed cover Easy to install and operate White color Fits post-1995 Elixir trailer roof vents and Ventline pre-2008 trailer roof vent (V2094)
The Redarc Tow-Pro Elite #RED44FR can be installed on your 2020 Toyota 4Runner using the plug and play adapter #RED49FR, which is designed for your 2020 4Runner. I've also included an installation video of this for you to check out.
The best option for your Sure-Trac trailer would be the Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 16' Long - Gray #290-46004. This cover is 192" long x 106" wide x 94" tall. From what I have found about your trailer…
Hey Shane. The Classic Accessories All-Weather UTV Cab Enclosure item #CA18020 is not rated to be installed while trailering at highway speeds. The wind coming off of your tow vehicle is going to beat it up that windshield and tear the buckles and…
I do have a couple options that will work for you, but unfortunately there isn't one perfect option that provides everything you are looking for. I have included the options below, along with some of the things that make them work or not work for…
Hello Billy; all you need to do is match up the cover size based on the length of your RP-196. It looks like the RP-196 is 22' 2" long so I recommend the Adco Olefin HD RV Cover for Travel Trailers #AD67ZR. This is an all climate cover so it…
You are correct the 12V PWM Filter for RV Backup Camera Systems item #VGR64VR will solve your problem. The PWM Filter is basically a capacitor that provides your camera with the necessary power that GM has decided not to provide through their 7-Way…
The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…
The Class III Curt trailer hitch part #C13418 that you referenced has a 5/8 inch diameter hitch pin hole which is standard for the 2 inch hitch size. So the Curt anti-rattle device 22323 part #C69HR would fit.
Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…
Both tow bars you referenced will work with the Blue Ox base plate kit part #BLU93FR that you just bought. The biggest difference will be that the Avail part #BX7420 is designed to allow for better maneuverability in tight turns. This is accomplished…
I can help you troubleshoot your issue on your 2015 Nissan NV3500. First let me answer your question about the use of a converter. You will not need the use of a converter for the utility trailer, because the 7-way on the vehicle is already converted…
There are a number of parts you will need to flat tow your 2018 Ford F-150 starting with compatible base plates. For these I recommend the Roadmaster EZ4 Base Plate Kit #RM-524431-4 because the brackets will be hidden away so your F-150 can maintain…
Retractable tonneau cover with T-slot rails lets you add a light-duty ladder rack or roof rack to your vehicle. Aluminum and vinyl construction has strength of a hard cover and seamless look of a soft cover. ... You can also use the rear plate of the tonneau cover to pull it closed. Side Rails with T-Slots The tonneau cover's side rails include integrated T-slots that allow you to mount accessories directly to the cover.
Electric, retractable tonneau cover with T-slot rails lets you add a ladder rack or roof rack to carry all your sports and recreational gear. Durable aluminum cover locks at any point along the rails, and the matte black looks great on your vehicle.Angled Canister The cover retracts into a compact, angled canister located at the front of your truck bed. This canister protects the retracted cover from the elements, and with the cover stored in the canister you'll have unrestricted visibility out of your rear window.
You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.Features: Custom-fit, retractable tonneau cover protects your cargo and your vehicle's bed from the elements Cover can be installed or completely removed by 1 person in approximately 10 minutes Requires only a wrench and screwdriver - no drilling Retractable design offers easy access to your bed Pinch grips underneath rear plate automatically retract cover when squeezed Tension spring allows cover to open smoothly Stored cover won't restrict rear window visibility Integrated pull strap lets you deploy cover quickly Closed cover secures truck bed when used in conjunction with locked tailgate Space-saving canister protects retracted cover from the elements to extend life of cover Compact, angled design allows for maximum useable cargo space in bed Drain tubes funnel water from canister out through hole in truck bed floor Low-profile cover sits inside truck bed rails for a flush look Aerodynamic style reduces wind drag and helps to improve gas mileage Black vinyl fabric bonded to rigid aluminum panels offers a seamless, stylish look Weather-resistant materials keep water and debris from entering the truck bed Foam seal installs under rails and canister at bulkhead Large seal at the rear of the bed closes the gap between the cover and tailgate Made in the USA Specs: Canister dimensions: 9-1/4" tall x 9-3/4" deep 2-Year limited warranty The Switchblade retractable hard tonneau cover provides you with security and weather protection for your truck bed, easy accessibility to your cargo, and the flexibility to haul large items that require full bed capacity whenever needed.
... EZClip pins allow the cover to be opened or removed for easy maintenance.Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
UV-resistant cover installs over your roof vent so you can open the vent and operate the fan in any weather. Zero-Leak mounting brackets and hardware eliminate the need to drill into your roof for installation.And the cover is translucent so that some natural light can shine through.
Cover protects the roof vent on your RV or enclosed trailer from rain and snow. Wing-shaped louvers allow maximum airflow through the removable grille. ... Then secure the cover to the brackets with the included hardware.
Retractable cover opens and closes manually with a pop-up, locking handle that provides excellent security for your truck bed. Durable polycarbonate is long-lasting and supremely weather resistant. ... This cover is better at preventing cargo theft than soft covers, which can be cut open with a knife. It also cannot be pried up at the edges like some hard, folding covers.
Soft tonneau rolls up to provide full truck bed access. Tension-free pinch levers prevent cover from popping up when you unlatch it. Self-tensioning frame with support beams keeps cover taut when closed.Features: Roll-up, soft tonneau cover keeps the gear in your truck bed secure and dry Cover rolls up for full truck bed access - secures with hook-and-loop straps and buckles Pinch levers let you easily open cover from either side of truck bed Cover latches shut whether tailgate is open or closed Tailgate lock keeps your gear secure Low-profile cover with textured, matte black finish sits 1-1/2" above the bed rails Double-coated, reinforced vinyl with aluminum bows is sturdy and resists tears Self-tensioning frame keeps the cover taught Weather seals keep out water without need for drain tubes Beveled edges direct water off the sides of cover Easy, clamp-on installation inside truck bed rails - no tools or drilling required Limited lifetime warranty
Throw this storage cover over your fifth wheel to protect it from rain and snow while you're storing it for the season. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.When you're putting the cover on your RV, the brand logo should be positioned at the front of your rig. Once the cover is in place, wrap the elasticized hem on the cover around the bottom corners of your fifth wheel to remove any excess slack in the material.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. ... To secure the cover closed, slide the pins back into the cover and push them up to lock them in place. Installation The FanMate vent cover is specifically designed for installation on newer-model MaxxFan and MaxxFan Plus roof vents.
When we decided to offer an etrailer hard, folding tonneau cover, we knew we wanted an affordable cover that would look great on your vehicle. It may not have all the flashy extras, but it's a quality cover that provides a lot of value.The etrailer hard tonneau cover is a well-built, folding cover that will keep your gear dry, protect it from theft, and look great doing it. All this for less than some of the competition's soft, roll-up covers.
Folding tonneau cover protects your truck bed and secures your cargo. Folds flat to provide open truck bed access. Clamp-on installation. Cover sits 1" above bed rails.Features: Hard, folding tonneau cover keeps the gear in your truck bed secure and dry Cover folds flat for open truck bed access Does not impair rear window visibility Pinch levers let you easily open cover from either side of truck bed Cover latches shut whether tailgate is open or closed Fiberglass-reinforced plastic is strong and dent resistant Honeycomb patterned internal structure provides additional strength Low profile and textured, matte black finish gives your truck a sleek look Weather seals keep out water without need for drain tubes Easy, clamp-on installation inside truck bed rails - no drilling required Specs: Weight capacity: 200 lbs evenly distributed Limited lifetime warranty
You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.Features: Custom-fit, retractable tonneau cover protects your cargo and your vehicle's bed from the elements Cover can be installed or completely removed by 1 person in approximately 10 minutes Requires only a wrench and screwdriver - no drilling Retractable design offers easy access to your bed Pinch grips underneath rear plate automatically retract cover when squeezed Tension spring allows cover to open smoothly Stored cover won't restrict rear window visibility Integrated pull strap lets you deploy cover quickly Closed cover secures truck bed when used in conjunction with locked tailgate Space-saving canister protects retracted cover from the elements to extend life of cover Compact, angled design allows for maximum useable cargo space in bed Drain tubes funnel water from canister out through hole in truck bed floor Low-profile cover sits inside truck bed rails for a flush look Aerodynamic style reduces wind drag and helps to improve gas mileage Black vinyl fabric bonded to rigid aluminum panels offers a seamless, stylish look Weather-resistant materials keep water and debris from entering the truck bed Foam seal installs under rails and canister at bulkhead Large seal at the rear of the bed closes the gap between the cover and tailgate Made in the USA Specs: Canister dimensions: 9-1/4" tall x 9-3/4" deep 2-Year limited warranty The Switchblade retractable hard tonneau cover provides you with security and weather protection for your truck bed, easy accessibility to your cargo, and the flexibility to haul large items that require full bed capacity whenever needed.
Retractable tonneau cover with T-slot rails lets you add a light-duty ladder rack or roof rack to your vehicle. Aluminum and vinyl construction has strength of a hard cover and seamless look of a soft cover. ... You can also use the rear plate of the tonneau cover to pull it closed. Side Rails with T-Slots The tonneau cover's side rails include integrated T-slots that allow you to mount accessories directly to the cover.
Retractable tonneau cover with T-slot rails lets you add a light-duty ladder rack or roof rack to your vehicle. Aluminum and vinyl construction has strength of a hard cover and seamless look of a soft cover. ... You can also use the rear plate of the tonneau cover to pull it closed. Side Rails with T-Slots The tonneau cover's side rails include integrated T-slots that allow you to mount accessories directly to the cover.
Extang E-series tonneau cover features a tri-fold vinyl cover and an easy-to-use clamping system for installation and removal. Lightweight aluminum frame. Full perimeter seal keeps water out and prevents leaks.Features: Custom-fit tonneau cover protects your cargo and your vehicle's bed from the elements Aerodynamic style reduces wind drag, improving gas mileage Self-contained cover completely removes from truck bed No rails to remain on bed once tonneau is removed Attachment hardware is built into the cover - no separate clamps or bolts to install or lose Tri-fold design allows for partial bed access in seconds Lift panel at tailgate to get at contents of bed Fold up and secure rear and center panels to free up two-thirds of your bed Sturdy, spring-loaded clamps ensure a secure truck bed when tailgate is closed and locked Full perimeter rubber seal keeps water from entering your truck bed Hassle-free installation with no tools or drilling Made in the USA 5-Year limited warranty
Install crossbars (sold separately) in the slotted rails of this heavy-duty cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.This cover is better at preventing cargo theft than soft covers, which can be cut open with a knife. It also cannot be pried up at the edges like some hard, folding covers.
This heavy-duty polyethylene cover keeps your propane tank free of dirt, rain, and debris. The lid opens for easy access to your tank. Cover snaps on underneath (1) 20-lb steel propane tank. ... Features: Cover protects your propane tank from dirt, rain, and flying debris Fits (1) 20-lb steel tank Attached lid opens for easy access to valve Heavy-duty polyethylene construction is fade resistant Easy assembly and installation Screws and lock nuts hold cover together Bottom tabs and bungee holes let you lock cover into place around your tank Attractive black color streamlines the look of your RV Made in the USA Specs: Dimensions: 18-1/2" wide x 19-3/4" tall x 13-1/2" deep 1-Year warranty 40565 Camco Motor Home Polyethylene Propane Tank Cover for One Twenty Pound Steel Tank - Black
Filters
