Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connectors plug directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
4-9.16" x 2-1/2". Incandescent trailer dome light provides bright light for an interior area. Built-in switch controls power. Durable steel base. Surface mount to trailer. Single wire with 0.180 male bullet. (1) 1156 bulb.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
In order to actuate the trailer brakes, you'd need a brake controller installed in the vehicle and a 6 or 7-way trailer connector. A 4 pole flat wiring harness like the #18002 you'd looked at carries 4 circuits- right turn/brake lamp, left…
We do have a locking hitch pin availaible for the 3" receiver on your 2017 Ford F-350. I recommend using the Fastway Trailer Hitch Receiver Lock - 2", 2-1/2", and 3" Hitches - 3-5/8" Span #FA86-00-3160. Not only will this fit…
The best trailer hitch we have for clearance on your 2013 Toyota Highlander is the EcoHitch Hidden Trailer Hitch Receiver #306-X7137 as it has a crosstube that sits behind the bumper so the only part below the bumper is the 2" hitch receiver…
Though it will depend on the hitch you have installed, all of the M10 bolts for the Draw-Tite #75726 and 75586 should be torqued to 42 lb-ft. The Curt #13534, which also uses M10 bolts, should be torqued to 48 lb-ft. If you installed an EcoHitch,…
I reached out to my contact at EcoHitch and she verified that the Hidden Trailer Hitch Receiver #306-X7137 will fit with the full size spare tire beneath your 2008 Toyota Highlander. You will want to lower/remove the spare during the installation…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
For your 2022 Subaru Outback the best hitch for towing is the etrailer Trailer Hitch Receiver #e25TR. This is a custom fit Class III hitch with a 2" receiver. It has a maximum gross trailer weight of 3,500 lbs and tongue weight of 350 lbs. It…
The hitch receiver that I recommend is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C73DR. This hitch receiver has a maximum tongue weight of 525 lbs and a maximum gross trailer weight of 3,500 lbs. or 4000 when using a weight…
You will need to use the included circuit tester with the #119250KIT wiring kit to test the tail light wires on your vehicles and then make the connections accordingly. The connectors are labeled. The one with the yellow sticker is left turn signal,…
I would be happy to go over all of the differences between the Curt Trailer Hitch #C67JR, and EcoHitch #EH34FR for your 2021 Subaru Outback Wagon. Starting with what they have in common, they all have a hidden crosstube meaning that once installed…
To connect your vehicle that has a 4-Way flat connector to your trailer that has a 7-Way connector, you will need to install a 7-Way on the rear of your vehicle. If you just want or need the tail light functions to operate on your trailer you will…
The trick here is to get as close as possible. If you are talking about less than 2 inches or so, there is nothing to worry about. Having the trailer tongue a bit too high is preferable to it being too low. You may be a good candidate for an…
Filter Results
