Kit Includes: One Inner Bearing and Race One Outer Bearing and Race Grease Seal Cotter Pin EZ Lube spindle washer Fits spindles that use 1.063 ID inner and outer bearings Outer Bearing Inner Bearing
This powerful dual range heat gun lets you remove paint or putty, bend plastic pipes, and more. There are 2 temperature settings and 4 nozzles to choose from. Hanging hook lets you store the heat gun when not in use. Durable plastic construction., plastic construction with ceramic insulators Specs: Voltage: 120 volts Temperature: Low setting: 700 degrees F (375 degrees C) High setting: 920 degrees F (495 degrees C) Wattage: Low setting: 1,000 watts
RV puck light recesses into the ceiling of your RV to provide you with a sleek, low profile look that other puck lights don't have. Warm white LEDs are more energy-efficient, last longer, and burn brighter than incandescents. hardware not included Wires to a light switch inside your RV or camper - white for ground and black for power Specs: Overall dimensions: 4-1/4" diameter x 1" deep Cutout dimensions: 3-3/8"
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14" to 15" wheels. 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 14" and 15" Axle rating: 3,500 lbs Limited 1-year warranty Note : Because free-backing brakes are designed to eliminate nearly all
Free-backing, driver's-side and passenger's-side drum brakes won't engage when you reverse, even if your actuator is activated. Automotive-grade friction pads and e-coated backing plates are long-lasting. Fit 14" to 15" wheels. (BRKH10B) sold separately QAI and CSA certified Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 10" diameter x 2-1/4" wide Mounting
Free-backing hydraulic drum brakes won't lock up when you back up, even if your actuator is engaged. 12" x 2" Assemblies have e-coated backing plates. Fit most 14-1/2" to ... : 14-1/2", 15", 16" and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Reverse Easily with Free-Backing Brakes Backing up your trailer might be the only time
Free-backing, driver's-side and passenger's-side brakes won't engage when you reverse, even if your actuator is activated. Automotive-grade friction pads and e-coated backing plates are long-lasting. Fit 14.5" to 16.5" wheels., Lippert (LCI), and AL-KO Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16" and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs
Free-backing hydraulic drum brakes won't lock up when you back up, even if your actuator is engaged. 12" x 2" Assemblies have e-coated backing plates. Fit 14-1/2" to 17-1 ... ensures quality Made in the USA Specs: Dimensions: 12" diameter x 2" wide Wheel size: 14-1/2", 15" 16" or 17-1/2" Mounting flange bolt pattern: 5 bolt Axle rating: up to 7,000
Launch your boat without locking up your brakes. Free-backing brakes are a must-have if your surge actuator doesn't have a reverse lockout. 10" x 2-1/4" Marine-grade assemblies fit ... hardware (BRKH10A) sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 10" diameter x 2-1/4" wide
Drum brake assemblies provide superior protection from corrosion and let you reverse without actuating. Designed for use with hydraulic brake actuators that do not include reverse lockouts. Fit most 14", 14" and 15" wheels. (passenger's-side) brake assembly included Mounting bolts and hardware sold separately Specs: Dimensions: 10" diameter x 2-1/4" wide Pad lining: 44 sq in Wheel size: 14" and 15" Mounting flange
... 14-1/2" and larger wheels.: 12" diameter x 2" wide Wheel size: 14-1/2" and larger Mounting flange bolt pattern: 5 bolt Axle rating: up to 7,000 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot
Launch your boat without locking up your brakes. Free-backing brakes are a must-have if your surge actuator doesn't have a reverse lockout. 12" x 2" Marine-grade assemblies fit 14" to 16" wheels. Made in the USA. size: 14-1/2" to 16" Mounting flange bolt pattern: 5 bolt Axle rating: up to 7,000 lbs 1-Year warranty Marine-Grade Brakes Offer Excellent Corrosion Protection If you have a seasonal boat or a
Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight while towing. separately Assembled in the USA Specs: Application: 2" x 2" trailer hitch receivers Ball mount Gross towing weight: 7,500 lbs Tongue weight: 750 lbs Ball hole diameter: 1" Drop: 2-1/4" from
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Warm white LEDs are more energy efficient, last longer, and burn brighter than incandescents. The light turns on and off when wired to a switch. Includes a white trim flange for a clean, finished look Specs: Overall dimensions: 3" diameter x 1/2" deep Mounting hole spacing (center to center): 2" Wiring length: 5-1/2" Operating
This 5-piece set includes tools for removing internal or external trim and molding fasteners. Anti-marring design helps prevent damage to your vehicle's paint, upholstery, chrome, or finish.
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Warm white LEDs are more energy efficient, last longer, and burn brighter than incandescents. The light turns on and off when wired to a switch. polarity correction - white for ground and black for power Specs: Overall dimensions: 4-1/2" diameter x 3/4" deep Wiring length: 5-1/2" Voltage: 12V DC Power draw at 12V: 0.26 amps Light
Free-backing, driver's-side and passenger's-side drum brakes won't engage when you reverse, even if your actuator is activated. Automotive-grade friction pads and e-coated backing plates are long-lasting. Fit 13" to 15" wheels., including Dexter, Lippert (LCI), and AL-KO Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 13", 14", and 15" Axle rating: 3,500 lbs Limited
4" x 1-1/4" Rectangle. Red and amber trailer reflectors meet FMVSS requirements for reflex reflectors. Durable acrylic construction. Self-adhesive backing allows for stick-on application. for easy stick-on application Specs: Quantity: 4 reflectors Dimensions: 4" long x 1-1/4" wide x 3/8" thick 3-Year warranty
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizer jacks. Stack the pads to get 12-3/8" of height. blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizer jacks. Stack the pads to get 12-3/8" of height. blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Filter Results
