Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
In order to determine if the: -Vesper Steel Modular Trailer Wheel #TA97RR is going to work with your ST205/75R15 tires or not you're going to want to make sure you measure the bolt pattern needed for your hubs. The Vesper Steel Modular…
view full answer...While Draw-Tite has confirmed that the Max-Frame Trailer Hitch Receiver #DT22MR will fit your 2023 Kia Sportage we have not had one in to install in our facility for images. I reached out to Draw-Tite and they confirmed that there is no additional…
view full answer...The number on the lens is not a part number. It is a rating for the lens/light. Based on that number it looks like the best match we have is #A31RB which is rated SAE AP2 86. The A in the number just means that it has a built-in reflector.
view full answer...If your trailer has 7 wires running all the way back to the brakes, then yes, you can tap into the existing wiring. Each of your new brakes will have two wires for the brake magnet. One wire is for 12 volt power to the brake magnets and the other…
view full answer...Although we do have a fender with similar dimensions, we do not carry anything that is an exact match. When choosing a replacement you want to do your best to match the dimensions of your old fender, but more often then not an exact match is not…
view full answer...That looks a lot like our part #MCL180ARB. Check out the dimensions in the diagram and compare them to yours. If they don't match let me know what they are but I think this is the correct light.
view full answer...You can change the lens around on the LED Trailer Fender Clearance Light - Submersible - 2 Diodes - Amber/Red - Driver or Passenger Side item #MCL180ARB. This light can be mounted on both sides but does not come in a different orientation because…
view full answer...You do not have to change all of the trailer lights to LEDs in order to install and use the LED Trailer Fender Clearance Light #MCL180ARB. You can have a mix of LED and incandescent. The only drawback is that if you had an LED light right next to…
view full answer...You absolutely can mix LED and Incandescent lights on your trailer. For your PM444 replacements, I recommend the Optronics Over 80" Wide, Square LED Trailer Tail Light, 7-Function, 18 Diode, Right Hand #STL2RB and Left Hand #STL3RB. The LED…
view full answer...Thanks for the picture. I found a great replacement tail light combo for you. I recommend the Optronics LED Combination Trailer Tail Light - Submersible - 7 Function - 18 Diodes - Square - Passenger Side item #STL2RB. And driver's side item…
view full answer...You do not have to connect the ground wire of the LED Trailer Fender Clearance Light #MCL180ARB to your main ground that goes to the wiring box. What you can do is use a ring terminal such as #44-5310A and screw like #101131802 and ground it to your…
view full answer...In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…
view full answer...Filter Your Search
Contact and Help