The EZ Jack is an easy-to-use, safe and reliable device that functions as a jack for changing tires on dual-axle trailers. It also serves as a wheel chock or a level. It supports up to 20,000 lbs yet weighs just 11 lbs for easy handling and storage.
Raise your trailer quickly and effectively with the Rapid Jack from Andersen Manufacturing. Simply drive your trailer onto the jack for a quick boost. Also functions as a leveler for single-axle trailers and as a trailer jack base.
7-1/2" Tall x 30" long ramp can be used to help change a tandem axle trailer tire or safely guide your vehicle into a trailer. Provides buffer between vehicle wheel and trailer wheel well. Fits tires up to 10" wide.
Place this sturdy chock in between the tires on your tandem axle trailer or use it as a stand for your tongue jack. Works with jacks that have 2" diameter inner tubes or jacks that have either a footplate or a caster.
These strong ramps have non-skid feet that grip the ground as you drive-up them to prevent them from sliding. Raised bumpers and a treaded surface ensure safe use. Durable polypropylene construction. Works with tires up to 9" wide.
8" Tall x 72" long ramps let you lift your vehicle for service or display. 2-Stage incline with a 6.8 to 10.8 degree angle of approach accommodates vehicles with very low-ground clearance. Fit tires up to 10" wide.
You are 100% correct! The closest match and best option to upgrade your 7.50-16 LT bias ply tires, is going to be an ST235/85-16 radial tire, like the Kenda Karrier #AM32743B you were checking out. This tire is pre-mounted on a 16 inch diameter by…
You will be okay. As a general rule of thumb the minimum safe distance between front and rear tires on the same side of a tandem axle trailer is 4 inches. You will need a minimum of 1 inch between the tires with the suspension in full flex when the…
It is possible that the 10K axles that were retro-fitted to your trailer also had larger diameter wheels/tires installed on them to take advantage of the new axles' higher weight capacity. The bare minimum tire spacing on a tandem axle trailer is…
You can interchange those tires in an emergency, like if you are off road somewhere and you have a tire on your trailer blow. But you don't want to have two different tire sizes on your trailer for very long. I would only leave it on there long…
The Goodyear Endurance trailer tires are the only USA made trailer tires out there. We do not carry them in your size or the close trailer tire size of 235/85-16 that would fit your same wheel. If you want a tire and wheel, we have the Kenda…
The first thing you will need to check is if there is enough space around the existing tires to use the larger size. Based on the old size you have, 235/75-15 (which isn't a common trailer tire size) the tires are approximately 28.8 inches tall…
There are brighter lights available for your current Bargman 92 Series lights, but none that have a reverse light function. So to replace your current lights with brighter LEDs you will need the LED Trailer Tail Light - Driver's Side…
As long as you have enough room for the larger wheel/tire combo you can definitely use larger tires. This includes wheel well clearance (we recommend at least 4") and tire to frame clearance (we recommend at least 2"). I don't believe…
For your replacement tire combinations, I recommend the Karrier ST235/85R16 Radial Trailer Tire with 16" White Wheel - 6 on 5-1/2 - Load Range E #AM32764. These combinations are the correct bolt pattern but they are obviously slightly larger…
The overall size of the Furrion Over the Range RV Convection Microwave part#FMCM15SS is 29-15/16" wide x 16-3/8" tall x 15" deep and requires a 30" cutout. If this matches the opening and size of the model you have this will be a…
There are a couple different ways to raise the ride height of your trailer, but before we choose the best option for you, we will want to take a look at a few things. First, it sounds like you are not towing with your trailer level so you do not hit…
The standard offset for trailer wheels is zero to keep the load on the trailer centered on the tire. The Karrier ST235/85R16 Radial Trailer Tire with 16 inch White Wheel - 6 on 5-1/2 - Load Range E, item #AM32764, comes with a 0 inch offset wheel, is…
10" Tall x 67" long ramps let you lift your vehicle for service or display. Ramp incline creates a 10.8 degree angle of approach. 2-piece design. Fit tires up to 12" wide.
Replace the cable on your trailer breakaway device with this durable, coiled cord. No more dragging or fraying. No need to wrap cable around your trailer frame. Works with any pin-style breakaway device.
10" Tall x 80" long combo ramps can be used to lift your vehicle for service, load it onto a trailer, or display it at a show. The 8.5 degree angle of approach is perfect for low-ground-clearance vehicles. Fit tires up to 12" wide.
10" Tall x 67" long heavy-duty ramps let you lift your vehicle for service or display. 5,000 lbs capacity for heavier vehicles. Ramp incline creates a 10.8 degree angle of approach. 2-piece design. Fit tires up to 12" wide.
Radial tire has a ply rating of 10 and a 3,640-lb maximum load at 95 psi. The 16" x 6" steel trailer wheel has an 8 on 6-1/2 bolt pattern. Black powder coat finish provides rust resistance. Meets DOT specifications.
Full-size, folding road bike is great for leisure riders, shoppers, students, and commuters with limited storage space. Semi-knobby tires provide excellent grip on paved surfaces, and the cargo rack lets you carry groceries, books, and other gear.
Replaces the switch that came with your Dexter trailer breakaway kit (34-285). This switch signals your breakaway kit to activate your trailer's electric brakes in the event that your trailer accidently separates from your tow vehicle.
8" Tall x 56" long ramps let you lift your vehicle for service or display. Ramp incline creates a 10.8 degree angle of approach. 2-piece design. Fit tires up to 10" wide.
As a crucial component to a trailer breakaway system, this breakaway switch activates the trailer brakes should the trailer become disconnected from your tow vehicle. 48" Long breakaway cable and 44" long installation wires.
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
10" Tall x 15" long wheel cribs can be used to lift your vehicle for service or display. Replaces cumbersome jackstands. High-density foam with durable protective coating. Fit tires up to 10" wide.
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
8" Tall x 15" long wheel cribs can be used to lift your vehicle for service or display. Replaces cumbersome jackstands. High-density foam with durable protective coating. Fit tires up to 10" wide.
These strong ramps have non-skid feet that grip the ground as you drive-up them to prevent them from sliding. Raised bumpers and a treaded surface ensure safe use. Durable polypropylene construction. Works with tires up to 10" wide.
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.
10" Tall x 67" long ramps let you lift your vehicle for service or display. Ramp incline creates a 10.8 degree angle of approach. Fit tires up to 12" wide.
Filter Results
