Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...To replace the existing 4.80-12 size tires on your Carry-On utility trailer, I recommend the Taskmaster Bias Trailer Tire, 4.80-12, Load Range C #TTWSF48012C. For this tire mounted on a wheel with a 5 on 4-1/2 inch wheel bolt pattern you can use…
view full answer...The idea behind the #CAM55313 RV Power Defender is that you'd plug it into the power source and let it analyze the incoming power to ensure it's safe before plugging your RV into it. The unit doesn't use a breaker or a fuse,…
view full answer...Yes, the Camco RV Power Defender Circuit Analyzer Dogbone part #CAM55313 will act just like a normal surge protector. The analyzers senses incoming current when plugged into an outlet and will detect malfunctions such as open circuits, high voltage…
view full answer...To measure the width of a trailer wheel you will measure from where the tire beads will seat on the wheel. That will be from the inside of the inner wheel flange to the inside of the outer wheel flange, not from edge to edge of the wheel. To measure…
view full answer...Yes, the load range E Taskmaster ST235/80R16 Radial Trailer Tire #TTWTRTM2358016E will fit a 16x6-inch-wide rim such as #TA73VR. This tire also fits wider 16-inch rims: 6-1/2-inch, 7-inch and 7-1/2-inch. When mounted and fully inflated the overall…
view full answer...The gooseneck ball part #BWHB94009 that you referenced does have a 2 inch diameter shank like what you said you need. Do you need a coarse thread? If so this will work well as it is a 2 inch diameter shank with coarse threads.
view full answer...Thanks for the picture of what you have and the info you listed. The correct wheel you need is the part #AM20794 that you referenced.
view full answer...The fittings of the RhinoFLEX RV Sewer Hose with Swivel Fittings, 4-in-1 Adapter, and Storage Caps #CAM39761 will not fit in your bumper that is 3-3/4 inches (the bayonet fitting on this is the standard 4-3/16 inches), but the fittings are actually…
view full answer...While we have an option for you, both of the hoses from the EZ Coupler RV Sewer Hose Kit - (2) 10' Long Hoses #D04-0115 will be 50 inches when collapsed, which is too long for your 4 foot bumper. You can use one of the 10 foot hoses, the EZ…
view full answer...Check out the 49 second mark of the video link I attached to see the RhinoFlex Hose part #CAM39761 fit into the bumper of an RV like you asked about.
view full answer...Per Viair their RV Winterizing Kit #VA27WR can only be used with the following compressor systems. Viair Automatic RV Portable Air Compressor for Class C RVs - 150 psi - 2.30 cfm #VA87WR Viair Automatic RV Portable Air Compressor for Class A RVs -…
view full answer...Filter Your Search
Contact and Help