Search: 3375471001   >  

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as easily.…

Great question! The Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles #TSR14KT01 have an articulation of 1-27/32 so you need to make sure that you have about 4-5/8" of space above your tire. I confirmed this with my…

This particular model of the Silent Ride suspension, #TSR14KT01, is rated for 14,000 pounds and has a 3 inch round axle seat. I have included a picture that shows all of the important measurements for this unit for you as well. Current pricing is…

The Timbren Silent Ride #TSR14KT01 can actually be installed by welding it on or bolting it on. You could do both welding and bolt it on, but that is not really necessary. I am not sure of the bracket to move it around on the frame, but they do have…

You'll need to start by having a new hanger welded on since it looks like the hanger towards the front of the trailer has been broken off. Once that's welded in place you can then install a new leaf spring. To determine the correct…

Yes, the Replacement Master Cylinder for Demco Actuators #5672 will work fine with your 2016 Demco AT6000P car hauler since it utilizes a Demco actuator. Additionally, this master cylinder is made in the United States and has an overall measurement…

Yes, there are replacement master cylinders for surge brake actuators like the Demco Actuator part #DM8203102 that you referenced. If this was the actuator that you have you would want the Replacement Master Cylinder #5672. If you have a different…

No, the Timbren #T54FR cannot be used as a triple axle (or tandem axle) set up; for a triple axle set up for 8,000 lb axles the only option is the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Triple 8K, 3" Trailer Axles…

When choosing between the Single-Axle Trailer Hanger Kit for Double-Eye Springs part #APS1, part #APS2, and part #APS3 it will be best to use the one that has measurements that most closely resemble what is already on your trailer. For example, if…

For a single axle slipper spring hanger kit to be used with the slipper spring part #e33SR you'd want to use the part #APS3SE.

The APS1, APS2, and APS3 are all suspension kits for single-axle trailers with 1-3/4-inch double-eye springs. They are designed for use on trailers with single, 2,000-lb to 7,000-lb axles. The difference in the kits are in the rear hangers and the…

I went out to the warehouse and pulled hanger kit #APS1 to measure the hangers for you. The larger hangers measure 3 inches long, 2-5/16 inches wide, and 2-1/8 inches tall overall. The smaller hangers are 2-1/8 inches long, 1-13/16 inches wide, and…