Result: 166079

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

I have an alternative solution for you, but I spoke with my contact at Bulldog and he informed me that there isn't really a great way to lock the Bulldog Gooseneck Coupler Head #BDGN240200. What you will need to do is jack the trailer this…

With the Fulton weld-on gooseneck hitch coupler GN24, part #BDGN240200, you can use Blaylock coupler lock #BLTL-50 along with padlock #ML40D.

There really is not any type of quality difference between the two slipper springs: - 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long #e99SR & #SP-178275 They both have the same measurements, steel construction,…

Hey Josh, The Replacement Motor for Retrax Powered Retractable Tonneau Covers #RTX79TR is going to include just the motor and mounting hardware. If you're needing a new remote or other replacement parts then I'll need to know which model you…

It sounds like you are looking for a replacement Lippert hydraulic leveling jack. We have several options that you can see at the attached link. I would recommend getting the part number of the jack you have and I'll help you pick out what you…

The RVP 8000 series AC model 8333A871 is effectively a Coleman Mach air conditioner, as RVP is the parent company and owner of the Coleman AC line of products; this means they will have the same wiring connections as a Coleman unit. To replace an…

We actually have an adapter that will allow you to use the Advent Air RV Air Conditioner part #ACM150 with your existing wall thermostat and distribution box, the Coleman Mach Adapter Wiring Kit part #ACCOLKIT which also makes for a plug-in play…

Although the Snap-on Reflector Ring, #A78RXB, will not fit the STL178 series lights like the Optronics GLOLight LED Stop/Turn/Tail Light #STL178RFPB, I do have a solution for you. Take a look at the Sealed, 6-1/2" Oval LED Trailer Stop, Turn and…

Based on my research the Atwood jack 80274 was an A-frame type side-wind tongue jack with a 2K weight rating. The Pro Series jack #PSRV20000103 that you referenced is a suitable replacement for this discontinued product. The Pro Series offers a 2K…

The harness for installing a brake controller in your 2017 Ford F-350 is find behind the instrument panel of your 2017 Ford F-350. If you check out the picture I attached you'll see how it is accessed. I also attached an install video that shows…

The factory brake controller harness on your 2016 Ford F-250 Crew Cab should be located behind a small dashboard panel to the right of the steering column. Behind the panel there should be a grey connector. This connector will be what mates with the…