Hey Deb, You could just remove the load stops for the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar #RTL002 and clamp on one kayak carrier like the Rhino-Rack Kayak Roof Rack w/ Tie-Downs #S512-S512X to the crossbar and the other to the…
The dynamic weight rating of the crossbars on the Yakima EasyRider Double Decker Trailer #Y08129 is 350lbs. If you are looking to use this with one of the Yakima SkyRise HD Tent #Y07437 you will want to get the SkyRise Tent Kit for Yakima EasyRider…
Hey Ken, I recommend going with the Yakima EasyRider Double Decker Trailer #Y08129. This trailer will let you carry up to 4 kayaks up to 19' in length, can be used to carry your 12' John boat, has a 500 lb capacity, and has a top set of…
I'm not able to identify a matching circuit board to what you are looking for just based on pictures as none of what we offer looks exactly the same but if you can get me the model of your MaxxFan I can see what you would need. Sometimes they…
It sounds like a circuit board issue. I recommend the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents #MA10A21275K if you have a 4500K, 7000K, or 7500K model. If your model is a 4000K, 5100K, or 6200K then Replacement Printed…
The Spare Tire with 5 Spoke Rim for Yakima Rack and Roll Trailer #Y08121 has wheel dimensions of 16" diameter x 1.85" wide and tire dimensions of 16" diameter x 3.25" wide. This is the tire #Y8880282 you referenced with inner tube…
One of the many nice things about the Rack and Roll Trailer is that Yakima did a really good job of designing it so that it doesn't require a lot of maintenance. - Yakima recommends checking the wiring connections, beginning with the trailer…
I went out to the warehouse and pulled Replacement Axle Bolt Kit #Y8880180 to measure the cotter pin in the kit. The pin is approximately 0.11 inches thick whereas the hole is just slightly larger than 0.125 inches (1/8). The pin has an overall…
I do have an option for you but The Detail K2 Mighty Multi A-Frame Trailer part #K2MMT5X7 is not designed to be used with cross bars and cannot support the a roof top tent like Yakima Sky Rise part #Y07437. The Sky Rise gets most of it's support…
Hello Peggy, thanks for reaching out. The only way we can provide the correct key would be if you have the key number. Without that, there is no way of knowing what key will open your lock. If the locks are currently unlocked, you can use the change…
The replacement inner tube for the Yakima Rack and Roll Spare part #Y08121 that you referenced is part #Y8880283. Not sure why you would want to run a tubeless tire on a Rack and Roll trailer like part #Y08107, but since it has never been tested I…
Unless you wrote down the key number in a manual for your Rhino-Rack loading system we have no way to know what key you have. If you can get a locksmith to remove the Lock #RRRBCA025 you could then order a new lock with new keys.
Filter Results
