Search: trailer hitch locks   >  

For your 2021 Honda CR-V there is quite a few trailer hitch receivers that fit the criteria you mentioned, the etrailer #e98848, the Curt #C13397, the Draw-Tite #DT79MR, and the EcoHitch #306-X7345. These hitches are really all pretty similar as they…

The Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar #RTL002 does use the Hitch Lock #RRRBCA025.

To secure your BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch #MD254 I recommend the XL Anti-Rattle Trailer Hitch Receiver Lock #SHP2040-XL. This not only stabilizes the ball mount in the hitch receiver, but it also provides a locking hitch…

We do have an option for you, though there isn't a standalone cushioned ball mount like the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C45949-22516 that is compatible or rated for use with a weight distribution system. What you can…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

For the tire size ST225/75-15 in the Load Range D like the part #274-000029 the weight capacity is 2,540 lbs at 65 psi. Which with just four of these you'd be over the 10k GVWR of the trailer you mentioned so you should be fine.

I'd go with the Wheel Master Vision Plus Extendable Towing Mirror part #WM6500. These install easily, give you about as wide of a viewing angle as you could possibly want and are very stable. Since they don't grab onto the vehicle mirrors the…

Yes, the etrailer Trailer Hitch Receiver Lock - Extra Long - Flush Design for 2-1/2" Trailer Hitches part #e98881 is the best option for the 2018 Toyota Tacoma with a factory hitch. The factory Toyota hitch receivers have thicker side walls…

Sounds like you need a hitch pin lock like the part #e98881 that has a usable span of 3-5/8 inches. I attached a review video for this product for you to check out as well.

The best hitch lock option we have available to the length you are needing is our etrailer.com Trailer Hitch Receiver Lock #e98881. This extra long lock is designed to fit 2 inch and 2-1/2 inch trailer hitch receivers. It has a usable span of 3-5/8…

The actual locking mechanism is the difference. The Trimax Heavy Duty #TMX42ZR has a much more robust hardened steel lock while the Trimax #TMX65FR uses a tube key style lock for the main lock.