Search: trailer brake wiring kit   >  

You may need a 4-way Modulite Vehicle Wiring Harness Kit with 4 Pole Trailer Connector #118379 to work with your Tacoma. This connector plugs directly into existing wiring no cutting, splicing or tapping required. If your truck already has a 4-way…

I recommend using the T-One Wiring Harness #118379 for your 2004 Toyota Tacoma PreRunner. This tees in behind the tail lights and gives you the basic 4-Way wiring needed to activate your trailer light functions. I also recommend picking up the…

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

When used with the #A45GB grommet, a 4-1/2 inch diameter hole is needed to flush-mount a 4 inch taillight.

The weight capacity for the Timbren Axle-Less systems like part #ASR5200S01 is per axle. So if you used this on a single axle trailer you would have the axle capacity of 5,200 lbs.

I recommend the Fastway e2 Weight Distribution #FA92-00-0800 for your 2022/2023 Coleman 17B travel trailer. This hitch is rated for a tongue weight of 400-800lbs and a maximum trailer weight of 8,000lbs. With a dry tongue weight of 385lbs by the time…

The ring terminal size you need for the posts of the junction box part #3375601101 that you referenced is 3/16 inch like the part #44-5310A which would work great. The terminal matches the correct ring size and also is designed for 10 to 12 gauge…

What you can do is apply something like Liquid Electrical Tape, #SWC50122, which will insulate, seal, and waterproof electrical connections. I would still recommend wrapping any connections with actual electrical tape as well for extra protection.…

The size of the nuts that fit the posts of the Trailer Wiring Junction Box #3375601101 is M5-.8 pitch. This does not come with extra nuts.

The first thing to consider is if the axle(s) are actually bent. Trailer axles have a bow in them so they are higher at the center than at the ends. When under load the axles straighten out some. That is part of how they get their capacities. If the…

The Dexter Electric Trailer Brake Kit w/ Parking Brakes #23-112-113 would be a fit for the 5-bolt pattern of the Timbren Axle-Less Trailer Suspension #TASR35HDS06 . Both the Dexter Trailer Hub and Drum Assembly #8-201-9UC3-EZ and etrailer Easy Grease…

The electric brakes I recommend to use with the Trailer Hub/Drum, part #8-219-50 and the Timbren Heavy-Duty Axle-Less Trailer Suspension, part #ASR35HDS02 is the Dexter 12 inch Nev-R-Adjust Electric Brake Assembly, part #23-459 for the right hand…