Search: trailer axels   >  

You can replace your square axle with round axles, but you would need to replace both axles instead of just one to ensure you have the same length axles, which will ensure your suspension and tires wear evenly and avoid problems. In order to choose…

It is very easy to over fill trailer hubs with grease when using the EZ lube fitting which then blows out the grease seal and makes a big mess. It's actually best to grease by hand and not use the fitting at all to prevent that. But if you are…

We don't carry the 2x2 inch square axle in that length. We carry the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs #T3584F-EZ-8974 which is the comparable round axle which will work just fine. You simply will use the…

Finding the right capacity winch for your boat trailer is fairly simple but you have factors that must be taken into consideration. Boat-size-to-winch capacity is generally 2 to 1. With good rollers and short winching distances, you could increase…

Thanks for reaching out! It looks like we did carry that exact wheel at one point on our site but it has since been removed. I reached out to our team about it and they said our rep told us it was NLA'd (no longer available) back in May of 2021.…

If you remove the hub and wipe away the grease on the spindle you can check to see if it is damaged. Look for an scarring, gouges, discoloration, or scoring on the spindle. If the spindle is damaged then the bearings won't ride properly and can…

I would be happy to help you. I have attached a dimensional drawing of the etrailer Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs item #e65GR.

Yes, the Trailer Axle with Idler Hubs #e65GR can be submerged and used on a boat trailer. If this is a replacement axle, make sure your current axle has a 3,500 lb capacity and 89" hub face measurement. You want the capacity and length to match…

I have a few options to replace the iRV33 Stereo. The iRV RV Stereo part #292-101079 you mentioned would require you to enlarge the cutout as well as hardwire the wiring harness which is pretty common for stereo installations. If you are looking for…

You can convert a single axle trailer to a tandem axle but it's more extensive than just putting the extra axle on there. The current axle does need to be repositioned for proper tongue weight. You will also need to cut off the current hangers…

The axles we offer are available in 3 lengths. They are 60 inch, 72 inch, and 89 inches hub-face to hub-face, but I may have a solution for you. We do offer axle-less systems that are either bolted or welded to the trailer frame. This would replace…

We do have the Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00 that will allow you to use an underslung axle on your trailer. The Dexter Trailer Axle w/ Electric Brakes #8327816-EB is a 5,200lb axle. It includes 12" brakes and a 6…