You can add a 7-Way trailer connector and retain the use of a 4-Way as well by installing #37185. The 4-Way you have will plug into the 37185 and the remaining wires would have to be hardwired in. The white wire grounds to the truck frame. Black is…
There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…
If you look at the installation details the spacer block size is not given so I went to our warehouse to measure it for you. The spacer is 1.5 x 1 x 0.25 inches. I've attached a photo to assist.
There are a couple different 7-way wiring harnesses that were installed on your 2013 Toyota Tacoma. Your 7-way may have a connector at the 7-way connection that will allow for you to quickly change it for a Hopkins Endurance Multi-Tow 7-Way #HM40950.…
The Draw-Tite Class III Max Frame Receiver Hitch part #DT38MR does require the removal of a 20" spare tire. The hitch is designed to fit with a stowed 18" tire but not 20" so it will not be able to remain stowed under the vehicle.…
Yes, the Draw-Tite trailer htich receiver, part #DT38MR, does fit completely behind the fascia cut out in the bumper of your 2014 Dodge Durango. The factory cover can be put back in place after the hitch is instaslled. Look at the two pictures…
If the OEM hitch on your 2015 Dodge Durango took the brunt of the damage to the point the safety chain loops were bent then that leads me to believe there could very well be other damage to the hitch and you'll want to look for places where the…
If a trailer wiring circuit is getting hot that means it's either over drawing or there's a short on the circuit. Since this is the trailer wiring circuit and you've already tried cleaning up the wiring it's most likely that the…
Most trailer wiring problems are the result of a bad ground. What I would do is start with the connectors. Maker sure the connectors on both the trailer side and vehicle side are free of dirt and corrosion and that they are properly grounded. Next, I…
The most common cause for trailer tail lights to not work when other trailer lights do is a bad ground. The reason the bad ground tends to show up on the running light circuit is that these lights remain on continuously, rather than flashing on and…
Sounds like you are looking for the part #C35FR. This is a 7-way adapter that plugs in and provides a 4-way with the resistors installed in it so that you don't get the bulb out error code when towing a trailer with LED lights.
I pulled 3 different wheels from our warehouse and weighed them on our scale for you. The Aluminum HWT Mod Trailer Wheel, part #AM22646 weighs 15.8 lbs. This has a pilot hole that measures 4.25 inches. I pulled a couple steel wheels as well. The…
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Filter Results
