Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi Ryan, If your leaf springs sit on top of your axles then you'll need the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket #SS26MV. If your leaf springs sit below the axles then you'll need the SumoSprings Trailer Helper…
view full answer...The Rhino-Rack Artificial Rain Gutters #739A are a universal fit since you'd be drilling through the wall of the trailer and bolting them in place. The only issue you might have is just with the bolt length. If the wall is too thick then…
view full answer...The brackets on the SumoSprings Trailer Helper Springs #SS26MV are 1-1/2" wide so they will fit evenly across the humps on your spring pads. I do not recommend cutting down the spring and you will be able to use these even with only having…
view full answer...You could use a Timbren suspension enhancement kit like the part #T92MR for if you have underslung axles or part #T46GR for if you have over slung. These attach to the spring pack/axle and provide additional support. Your axle would need to be…
view full answer...Timbren makes suspension enhancement kits for trailers like what you are looking for like with the part #T46GR for if you have a spring over axle configuration part #T92MR for axle over spring. This will give you the support you are looking for and…
view full answer...According to SumoSprings, 6" is the minimum for the #TSS-106-40. I asked them about this and they said you cannot use these if the space is under 6" so unfortunately they won't work for you. Doing so will overload the springs which can…
view full answer...Welcome back! The charge wizard included with the Progressive Dynamics RV Power Control Center item #PD4135K is only compatible with Lead Acid AGM batteries so once it's in lithium mode the charge wizard can be ignored or removed from the panel.…
view full answer...I do have an option for you but roof rails won't work very well on a teardrop trailer, even if you were able to get the rails to conform, it's likely the accessories would bind due to the steep angles. Instead, you will need to use artificial…
view full answer...All of the roof racks we offer for your 2022 Jeep Wrangler Unlimited with the sky top roof have a 100 lb dynamic (when in use on highway) roof capacity including the Yakima Round Bar Rack #Y00409 and #Y00101 as well as the Rhino Rack roof rack part…
view full answer...In order to re-seal the panels on your trailer you can use the TremPro 644 Silicone Sealant part #0160297 as an alternative to the Loctite Urethane Sealant part L0150811. The TremPro 644 Silicone Sealant has a similar compound to the Loctite Urethane…
view full answer...The correct hub/drums for the Timbren Axle Less kit part #ASR35HDS02 to provide a 6 on 5-1/2 inch bolt pattern would be the part #AKHD-655-6-EZ-K and then for brake assemblies you'd want the part #AKEBRK-7-SA and you'd be set.
view full answer...Hi Mike; the Ark Drop Down Corner RV Stabilizer Jacks #ARK77FR can be used in three different positions. At 30° and 60° they act as non-rated stabilizers. At 90° they have the 1,929 lb rating.
view full answer...Filter Your Search
Contact and Help