Search: teflon disc   >  

The Head Unit and R16 Roller Adapter #C16515 is more of an entry level fifth wheel head designed for a lower price point, whereas the A16 part #C16520 is a bit nicer with it's 2 piece jaw system that will provide better king pin contact which…

There is no specific height that you have to have in order to use a 5th wheel hitch, they are height adjustable by several inches and so is the pin box on most trailers. What you do need though is at least 5"-6" from the bed rails to the…

We tend to stick with the safe side of things and just recommend using a sliding 5th wheel hitch if you don't have an 8' bed, but we have heard and seen people 5th wheel tow just fine using a non-sliding hitch on a 6-3/4' bed. We've…

The height that you'll need to set your B&W Companion OEM 5th Wheel Hitch #BWRVK3775 will depend on the height of your truck's bed and the height of your king pin plate when the trailer is level. For example, if your truck measurement is…

Yes, you absolutely can use a B&W fifth wheel hitch in your short bed 2022 Chevy Silverado 2500. We do recommend using a slider hitch since you have the short bed. If your truck already has the OEM puck system in the bed, you can use the B&W…

Whether or not your pin box will come into contact with your tailgate is going to depend on a few different factors. Depending on how high you have the hitch head of the B&W Companion OEM 5th Wheel Trailer Hitch w/ Slider #BWRVK3670 in the bed of…

I'll start off by saying that I don't normally trust the VIN decoders available on the internet when it comes to being accurate with capacities and such, and the highest payload capacity I've seen in my research for the 2011 Chevy…

Thanks for the pictures and information! I just heard back from my contact at Lippert and your 2024 Keystone Cougar has a 1621 pinbox. You will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY58GR you were looking at. You will also need…

There are two ways to install a fifth wheel hitch on a pick up truck. One would be to use standard bed-mounted rails. Brackets are mounted to the truck frame with the bed rails sitting directly above. Holes are drilled down through the truck bed to…

Hey Lawrence, That is correct, solar panels systems are simply to recharge the battery and wouldn't directly power anything. They'll run directly to the battery bank. The Zamp inlet you have most likely is just a 2-pole SAE connector with a…

Ideally you want your trailer to be towed as level possible and still have at least 6 inches of clearance between overhang of the trailer and the bed rails of the truck. Since trucks tend to keep getting built taller and taller this can prove to be…

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…