Search: tdhp   >  

To mount your camper in the bed of your 2002 Ford F-150, you can use the Brophy Camper Tie Downs, #TDSF, as long as your camper is not longer than 8 ft. These tie downs will install in the stake pockets on the top of your truck bed walls. If your…

It sounds like you're looking for a roof rack that mounts to the sidewalls of your Palomino SS 550 and can extend higher for when you pop up the top section of your camper. While I do have a roof rack system for your slide-in bed camper, we only…

I can only help you pick out the best psi but I can't tell you off-hand exactly the best pressure to use. What you want to do is put in an equal amount of pressure in both bags till the truck is sitting as close to stock ride height as it did…

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

Custom camper tie-downs that are mounted to the frame of your 2002 Chevrolet Silverado 2500 with 6-1/2 foot bed will be a lot more secure and stable than the clamp on, bed mount versions. They are custom built for your truck so they're…

We do carry Torklift brand tie downs for your 2004 Chevy Silverado that attach to the truck frame but I would need more info from you to pick them out. What is your bed length? Do you have running boards? Factory hitch?

We do carry a camper tie-down system that will work for your 2004 Chevrolet Silverado without drilling into the truck frame. I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs, for your Silverado. This system includes the front and the…

Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all…

Thank you so much for the info and the pictures! According to my research it looks like your Cummins Onan RV Generator uses a 3/8" NPT Female fitting so you'll need a hose like part #100040-144-MBS. I have attached a link to all of our hose…

Yes, we have exactlly what you need to add a 7-way connector to your 2022 Subaru Outback Wagon. Since you already have a 4-flat connector you will want the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge…

You can absolutely get a 7-way connection at the back of your 2022 Subaru Outback Wagon. The reason you are only seeing 4-way adapters is because your Outback Wagon does not have factory wiring. So essentially you will need to install a 4-way flat…

If your 2014 Toyota Tacoma came with the Factory 7-Way then you will want to look next to the driver side kick panel for the wiring harness. I have attached a video of the Tekonsha P2 #90885 being installed on a 2012 Tacoma that you can reference.…