Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.
view full answer...For a 10 foot trailer the storage cover you'd want is the Adco SFS part #290-46001 which is the correct size, installs easily, and has access doors in case you needed to get into the trailer with the cover installed. It will also do a great…
view full answer...Hey Dave, what you gave me is enough info to get you replacement bearings. The grease seal 471750 matches the part #TMK48ZR. For a Timken replacement for the L44610 part number you'd need #TMK63VR. Then for a bearing for the L44649…
view full answer...I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.
view full answer...Both of the ARK stabilizer jacks #ARK94FR and #ARK87FR can rotate 90 degrees forward and back so in a way it is 180 degrees like you asked about. The difference is the #ARK94FR has a square tube and #ARK87FR has a round tube. These are both going…
view full answer...The Buyers Products RV Side Camera w/ Night Vision #BP68FR is an addition to complete your RV camera system. It is designed to be used with a back up camera system like the Buyers Products RV Backup Camera System #3378883000, not as a stand alone…
view full answer...I attached a picture that shows what type of lighting requirements are needed for a trailer over 80 inches in width as well as a link down below that covers this as well.
view full answer...Though there isn't anything specifically for a 6 x 10 v-nose enclosed trailer, we have something that may work for you. Since the v-nose extends the length somewhat, a cover for a bumper-pull horse trailer up to 12 feet could work, depending…
view full answer...On Dexter 12" Nev-R-Adjust Electric Brake Assembly #23-458 the shoe pad thickness is 3/16 of an inch. Dexter says that you should replace the shoes if the material gets down to 1/16 of an inch thick or less.
view full answer...There a few different ways to determine this. You can have a helper activate the turn signals, running lights and brakes. If a single bulb lights for each function (on each side of the car) then you have incandescent lamps. If you have LED's…
view full answer...It looks quite good, in my opinion; I have gone ahead and added a photo for you of a 2024 Mazda CX-90 so you can see what yours will look like after the installation of the Curt Trailer Hitch Receiver #C25FV. The #C25FV has a concealed crosstube so…
view full answer...The best hitch for a 2024 Mazda CX-90 is going to be the Curt item #C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500…
view full answer...Filter Your Search
Contact and Help